A Narrowband Multi-Channel 2.4 GHz MEMS-Based Transceiver
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper presents the first low noise complementary metal oxide semiconductor (CMOS) terahertz (THz) imager based on source modulation and in-pixel high-Q filtering. The 31 × 31 focal plane array has been fully integrated in a 0 . 13 μ m standard CMOS pr ...
Twentieth century has been the golden age of semiconductor industry by achieving a high level of growth as a courtesy of developments in fabrication techniques and downscaling of the technology. Since the downscaling in current lithography technology is re ...
In recent years, bulk acoustic wave resonators (BAW) in combination with RF circuits have shown a big potential in achieving the low-power consumption and miniaturization level required to address wireless sensor nodes (WSN) applications. A lot of work has ...
Resonators for time and frequency reference applications are essential elements found in most electronic devices surrounding us. The continuous minimization and ubiquitous distribution of such electronic devices and circuits demands for resonators of small ...
A Bulk Acoustic Wave (BAW) resonator based 2.4-GHz low power receiver is presented in this work. The intrinsic high quality factor ( Q) of the BAW resonator (around 400 at 2.4-GHz) is exploited to provide channel selection at RF and in the frequency synthe ...
The performance of audio source separation from underde- termined convolutive mixture assuming known mixing filters can be significantly improved by using an analysis sparse prior optimized by a reweighting l1 scheme and a wideband data- fidelity term, as ...
Institute of Electrical and Electronics Engineers2014
In this work, a sub sampling receiver front end at 2.4 GHz with high Q filtering to perform channel selection at RF is presented. A low power solution for channel selection directly at RF is proposed in this work using pseudo-self-biased inverter amplifier ...
Internet of Things (IoT), which is one of the main talking points in the electronics industry today, consists of a number of highly miniaturized sensors and actuators which sense the physical environment around us and communicate that information to a cent ...
A VCO topology with a high gm at RF and low gm at low frequencies (LF) is presented. A high gm(RF) improves start-up conditions, and a low gm(LF) enables a significant improvement of the phase noise and the power supply rejection. The VCO with a modified p ...
The modulation characteristics of wafer-fused long-wavelength vertical-cavity surface-emitting lasers (VCSELs) for multichannel microwave-band analog signal transmission were investigated within a large-signal behavioral model based on a commercial microwa ...
