Polymer concrete-GRP plate hybrid joints for transverse moment-shear continuity in GRP bridge decks
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Reinforced concrete being the most applied construction material today performs very well in most applications but still lacks durability under severe environmental conditions. Especially existing structures built decades ago show degradation. Using Ultra- ...
This thesis addresses the seismic evaluation of existing buildings. In particular, it focuses on the seismic behavior of lightly reinforced shear walls that are not designed to withstand earthquake actions. A shear strength envelope for the assessment of d ...
This paper investigates the shear strength of beams and one-way slabs without stirrups based on the opening of a critical shear crack. The shear-carrying mechanisms after the development of this crack are investigated. On this basis, a rational model is de ...
The premature deterioration of reinforced concrete road structures is a heavy burden for society. In order to manage structures effectively and to reduce this burden to the minimum, the number and extent of interventions have to be kept to the lowest possi ...
Punching of flat slabs without transverse reinforcement has mostly been investigated in the past for slabs with equal reinforcement ratios in the two directions and loaded under axis-symmetrical conditions. However, in practice, slab bridges as well as man ...
Submerged concrete specimens with 0.55 and 0.65 water-cement ratio were studied under cyclic freeze-thaw conditions at two different rates of temperature change. The strain variation at the centres of each of the specimens was measured using embedded strai ...
Up until today reinforced concrete has been used in most cases for the manufacturing of bridge decks. Depending on the quality of the work carried out, defects can already occur after only a few years. These defects mostly appear in the form of corrosion o ...
An existing hybrid-GFRP/steel joint for load transfer and thermal insulation in concrete slab structures was developed into an all-GFRP joint. The new joint consists of a pultruded GFRP tensile/shear element anchored through adhesively bonded ribs in the c ...
This paper presents a new concept for a lightweight hybrid- FRP bridge deck. The sandwich construction consists of three layers: a fiber-reinforced polymer composite (FRP) sheet with T-upstands for the tensile skin, lightweight concrete (LC) for the core a ...
The design of reinforced and prestressed concrete girders is usually performed so as to avoid any non ductile failure mode. Amongst these failure modes, one of the most undesirable occurs by crushing of concrete in the web. To avoid this brittle type of fa ...
