Uniform Material Law: Extension to High-Strength Steels: A Methodology to Predict Fatigue Life of High-Strength Steels
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
SentryGlas®(SG)-laminated reinforced glass beams are numerically investigated. This innovative structural typology consists of a composite section in which the typical brittle behaviour of glass is overcome by means of stainless steel sections able to prov ...
The objective of this project is to analyse welding processes in high strength low-carbon steel grade S690 in numerical simulation with MORFEO codes and in experiments with a Gleeble® thermo-mechanical simulator instrument. The influence of phase transform ...
Under strong earthquake motions, the liquid stored within large unanchored steel tanks can cause rocking and uplift of the tank base from the supporting foundation. Repeated rocking can lead to low-cycle fatigue fractures in the tank base-plate, and ultima ...
Ingots of an oxide dispersion strengthened reduced activation ferritic steel with the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) chemical composition (in wt.%) were synthesized by mechanical alloying of elemental powders with 0.3 wt.% Y2O3 particles in a planetary ball ...
Effects of non-uniform strains on tensile fracture of fiber-reinforced ceramic–matrix composites have not been satisfactorily explained by existing mechanics-based models. In this paper, we use an exact model of fiber fragmentation under global load sharin ...
The goal of this project was to develop low-firing thick-film materials systems for the fabrication of piezoresistive sensors on special steels, for the fabrication of instrumented medical devices. To this end, a series of individual thick-film materials a ...
Using high-strength steels for pressure shafts and tunnel liners and taking into account significant rock mass participation allows the design of comparatively thin steel liners in hydropower projects. Nevertheless, during emptying of waterways, these stee ...
A new formulation for predicting an asymmetric, piecewise non-linear constant life diagram (CLD) is introduced in this paper. The development of the new model is based on the representation of the fatigue data on the stress ratio (R)-stress amplitude (σa) ...
The optimization of the forming of ODS tubes is linked to the choice of an appropriated constitutive model for modeling the metal forming process. In the framework of a unified plastic constitutive theory, the strain-controlled cyclic characteristics of a ...
