The effect of matrix characteristics on fibroblast proliferation in 3D gels

Martin Ehrbar, Jeffrey Alan Hubbell, Matthias Lütolf, Simone Rizzi
Elsevier, 2010
Article

Résumé

Engineering synthetic hydrogels on a molecular basis to introduce natural features that are important in instructing cell behavior is becoming increasingly crucial in biomaterial-based approaches for regenerative medicine and in cell biology to study cell–matrix interactions in three-dimensions (3D). Here, we used collagen gels and exploited the design flexibility of the biological, biochemical and physical characteristics offered by a PEG-based hydrogel system to systematically study the effect of specific extracellular microenvironments on the behavior of primary human fibroblasts in 3D. We firstly found that the proliferation profiles of fibroblasts from different patients cultured within collagen gels (3D) differed significantly from their behavior observed on tissue culture plastic (2D). Furthermore, using the biomimetic PEG-based matrix we showed that cell proliferation in 3D could be selectively manipulated via alteration of the gel characteristics. In particular, this study revealed that, in spite of matrix sensitivity to proteases (e.g. MMP) and the presence of cell-integrin binding sites, at high stiffness (elastic modulus, G′ >1200 Pa) the matrix acts as a barrier for cells cultured in 3D. Finally, a comparison between the biomimetic PEG-based and collagen gels indicated that differences in their viscoelastic behaviours, determined by the nature of network structures and cross-links, may influence the mechanism(s) cells employ to remodel their 3D extracellular microenvironment. In conclusion, these studies highlight that for proliferation in 3D, compared to 2D, cells require strategies to overcome the physical impediment posed by the matrix. We also demonstrate that by exploiting the design flexibility of the characteristics offered by these biomimetic hydrogels, it is possible to separately investigate complex aspects characterizing the cell–matrix interactions in 3D; this has the potential to have great impact in regenerative medicine, as well as in cell biology and cancer research.

Official source

https://infoscience.epfl.ch/record/150329?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Martin Ehrbar, Jeffrey Alan Hubbell, Matthias Lütolf, Simone Rizzi
Elsevier, 2010
Article

Résumé

Official source

https://infoscience.epfl.ch/record/150329?ln=fr

À propos de ce résultat

Concepts associés (21)

Concepts associés

Chargement

Publications associées (45)

Chargement

Afficher plus

Publications associées

Chargement

Publications associées (45)

Photopatterning of Synthetic Hydrogels

Katarzyna Mosiewicz

In recent years sophisticated biomaterials have made a significant impact on our understanding of cellular behavior, particularly in the fields of stem cell research and tissue engineering. Nevertheless, the promising potential of stem cells for regenerative medicine has remained largely unmet. One reason for such limitations could be that there is still incomplete understanding of stem cell behavior due to a lack of advanced in vitro tools suitable to achieve adequate control over cellular processes. By mimicking the dynamic and complex biophysical and biochemical interactions between cells and their natural extracellular matrixes (ECMs), it is possible that we may bridge this gap between current limited in vitro models and complex in vivo organisms. In this thesis, an innovative class of biomaterials is presented that enables the flexible in vitro recapitulation of the dynamic biochemical and biophysical signaling involved in controlling cell fate. Such systems of increasing fidelity to real physiological processes could bring new insights into fundamental cell biology as well as bring us to closer towards cell-based therapeutics applications. In order to achieve a dynamic artificial ECM (aECM), we designed chemical schemes which would allow us to control the biochemical and biophysical properties of the hydrogel in space, time and intensity. The chosen concept is built on a synthetic hydrogel providing static physicochemical support, while spatiotemporal control over a single or multiple signals is achieved by spatiotemporal photoactivation reactions within this hydrogel. Indeed, by modulating the duration, location and intensity of illumination, desired heterogeneities in biochemical and biophysical signal can be introduced in the otherwise homogeneous and static hydrogel network. To implement the designed hydrogel photo-patterning tool, new chemical components were synthesized. Synthetic hydrogels based on poly (ethylene glycol) (PEG) were utilized due to their inert properties, cell biocompatibility and lack of unspecific protein binding. Biochemical signal tethering was rendered spatiotemporally controllable by adding photosensitivity to the existing enzyme-based crosslinking scheme. This was achieved by functionalizing one of enzymatic substrate with a photo-labile “caging” moiety, thereby preventing crosslinking to occur until light illumination. This caged substrate was incorporated into the hydrogel network and served as a light-controllable and specific ligand-binding site. Importantly, it was possible to photo-pattern proteins, which are much complex than peptide-based biomolecules, and their bioactivity was fully preserved with this site-specific immobilization scheme. It was also possible to pattern biophysical cues by making the Michael-type (MT) addition reaction for crosslinking PEG-based hydrogel photosensitive. In this case, the thiol moieties of one of the reactive PEG macromers undergoing crosslinking, were equipped with a caging group which prevented its susceptibility to the counter-reactive functionality, the vinyl sulfone group. Thus, the crosslinking density of the hydrogel backbone could be controlled by light, which was directly translated into differential patterns of hydrogel stiffness. Using this approach, user-defined biochemical and biophysical patterns and even gradients could be obtained in the spatiotemporal manner within the same hydrogel. The crosslinking reaction is the critical parameter in the success of hydrogel photo-patterning, and must rely on a well-controlled and highly selective chemical scheme. Therefore, we also developed a novel enzyme-based cross-linking scheme for synthetic PEG hydrogels. The reaction originates from the naturally occurring post-translational modification of proteins by phosphopantetheine (Ppant) group performed by a family of enzymes known as Ppant transferases (PPTases). By synthesizing biochemical components of this reaction, we implemented a PPTase-catalyzed reaction to form and bio-functionalize PEG hydrogel. The utility of the developed hydrogel platforms was determined in the context of 2D and 3D cell culture. Photo-directed patterns of a cell-adhesive fibronectin fragment triggered adhesion and spreading of muscle progenitor cells, a phenomenon which occurred only within the areas of patterned signaling protein. A photo-patterned elasticity gradient was used to direct mesenchymal stem cell spreading and migration. Finally, the PPTase-based hydrogel was proven to be suitable for 3D culture, as shown by encapsulation of primary human fibroblasts. In this thesis, we demonstrated that a combination of chemical schemes could be assembled to achieve a functional materials toolbox which would begin to reconstruct the complexity of the dynamic in vivo ECM. Such a tool is expected to contribute to the field of cell biology by allowing us to study questions which previously could not be addressed in vitro, and could ultimately contribute to cell-based regenerative medicine.

EPFL2012

Chargement

The behaviour of cells cultured within three-dimensional (3D) structures rather than onto two-dimensional (2D) culture plastic more closely reflects their in vivo responses. Consequently, 3D culture systems are becoming crucial scientific tools in cancer cell research. We used a novel 3D culture concept to assess cell-matrix interactions implicated in carcinogenesis: a synthetic hydrogel matrix equipped with key biomimetic features, namely incorporated cell integrin-binding motifs (e.g. RGD peptides) and the ability of being degraded by cell-secreted proteases (e.g. matrix metalloproteases). As a cell model, we chose epithelial ovarian cancer, an aggressive disease typically diagnosed at an advanced stage when chemoresistance occurs. Both cell lines used (OV-MZ-6, SKOV-3) proliferated similarly in 2D, but not in 3D. Spheroid formation was observed exclusively in 3D when cells were embedded within hydrogels. By exploiting the design flexibility of the hydrogel characteristics, we showed that proliferation in 3D was dependent on cell-integrin engagement and the ability of cells to proteolytically remodel their extracellular microenvironment. Higher survival rates after exposure to the anti-cancer drug paclitaxel were observed in cell spheroids grown in hydrogels (40-60%) compared to cell monolayers in 2D (20%). Thus, 2D evaluation of chemosensitivity may not reflect pathophysiological events seen in patients. Because of the design flexibility of their characteristics and their stability in long-term cultures (28 days), these biomimetic hydrogels represent alternative culture systems for the increasing demand in cancer research for more versatile, physiologically relevant and reproducible 3D matrices. Copyright © 2010 Elsevier Ltd. All rights reserved.

Elsevier2010

Chargement

Breakthroughs in health care over the coming decades may well consist of cell based therapeutics, potentially allowing the repair and replacement of damaged tissues and organs. Recently developed induced pluripotency methods as well as advances in stem cell biology show hope of such a reality. But such prospects come with the need to have a robust understanding and control over cell development and differentiation processes. Cells in the body develop in tightly controlled and specialized micro-environments that provide many complex cues and interactions that guide cell fate by directing gene expression. But current cell culture techniques that are most widely used to study the cell outside the body have not significantly changed from when first started over a century ago, using simple containers and flasks with plastic surfaces. Many studies have shown that three-dimensions (3D) over conventional 2D cell culture alone, showed to have increased levels of cell organization, morphology and function. By combining novel biomaterials and microfabrication methods, this project aims to create a tool that allows the study of cells within a simplified 3D environment. With the potential to build up the physical and soluble complexity of this environment in a tailor made fashion, a "dissection" of the functions and influences of external factors may be understood. Such a tool can also be used for the development of cell based models, highly relevant for drug discovery application as well as potentially for the development of cell based therapeutics. We have developed a novel microfluidic 3D cell culture platform that allows controlled soluble factor perfusion in an enzymatically formed and cell responsive PEG-based hydrogel. Soft lithographic processes were used to mold microchannels on a layer of hydrogel. In a second step, a flat hydrogel layer is placed on top to enclose and form the microchannels . The system allows the control over soluble factor delivery and it is able to perform long-term cell culture and generate user controlled gradients of soluble factors. With continuous perfusion, metabolic waste is constantly removed and cells are supplied with fresh medium. The platform also can allow creation of tailor made environments building up complexity in a controlled fashion. Higher throughput is also achieved by arraying individual culture chambers. The device was applied towards the culture of mouse embryonic stem cells (mESC) in order to demonstrate their self-renewal capacity on the microfluidic platform. The effects of some cytokine factors were also studied. Meaningful readouts such as fluorescence are easily used for analysis and cells can possibly be extracted from the device for further downstream analysis and processing. Through this device we show that microfluidics technologies combined with biomaterials enables the creation of platforms that are biologically relevant for the study and understanding of cell processes from cancer to stem cell development, processes which are fundamentally regulated by interactions with the microenvironment. The platform developed may also be used to develop human tissue models perhaps more relevant than current animal based testing, providing new tools for drug development and also potentially new approaches for developing cell based therapeutics

2009

Chargement

Afficher plus

Photopatterning of Synthetic Hydrogels

Katarzyna Mosiewicz

EPFL2012

2009