Oxygen permeation, mechanical and structural properties of multilayer diffusion barrier coatings on polypropylene
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Titanium aluminium nitride (TiAlN)-based coatings are designed specially for applications where oxidation and wear resistance are primary demands, as in the case of cutting tools. Moreover the coatings are required to be thermally stable as well as have go ...
The influence of oxygen content on the properties of cathodic arc-deposited AlCr(OxN1-x) coatings has been studied. All samples were prepared in a nitrogen-rich mixture of N-2 and O-2 at 550 degrees C using lateral rotating arc cathodes (LARC) technology t ...
Aluminum rich oxynitride thin films were prepared using pulsed direct current (DC) magnetron sputtering from an Al95.5Cr2.5Si2 (at.%) target. Two series of films were deposited at 400 degrees C and 650 degrees C by changing the O-2/(O-2 + N-2) ratio in the ...
When silicon thin films are deposited by plasma enhanced chemical vapor deposition in a plasma regime close to powder formation, a new type of material, consisting of an amorphous matrix in which silicon nanocrystallites are embedded is obtained. This mate ...
Cohesive and adhesive properties of silicon oxide barrier coatings deposited from an oxygen/hexamethyldisiloxane gas mixture by plasma enhanced chemical vapor deposition, with controlled incorporation of carbon on 12 mm thick polyethylene terephtalate film ...
Properties of thin films such as the crystallinity of silicon deposited from SiH4 - H-2 discharges are governed by the plasma composition. Therefore, it is crucial to measure the plasma composition in order to understand and optimize the deposition rate, d ...
Due to their high hardness, high melting point and high chemical stability, transition metal nitrides present a great interest for various applications. This work constitutes a contribution to the understanding of the properties of Nb based binary and tern ...
Titanium dioxide (TiO2) is a widely investigated material for its biological compatibility, high dielectric constant and refractive index, chemical and mechanical resistance, and catalytic activity. Several different techniques are available to produce TiO ...
Research on silicon oxide thin films developed as gas-barrier protection for polymer-based components is reviewed, with attention paid to the relations between (i) coating defects, cohesive strength and internal stress state, and (ii) interfacial interacti ...
Light Induced Chemical Vapour Deposition (LICVD) of titanium dioxide thin films is studied in this work. It is shown that this technique enables to deposit locally and selectively a chosen crystalline phase with a precise controlled thickness at low substr ...
