Comparison of pressurized water reactor core characteristics for 100% plutonium-containing loadings
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
High-resolution gamma spectroscopy was performed on individual fuel rods of a fresh, highly heterogeneous Boiling Water Reactor (BWR) fuel assembly, after irradiation at low power in the PROTEUS reactor at PSI, to determine the ratio of neutron captures in ...
An important source of uncertainty in boiling water reactor physics is associated with the precise characterisation of the moderation properties of the coolant and by-pass regions, with significant impact on reactor physics parameters such as the lattice n ...
The behaviour of fission gas in high burnup fuel during steady-state and transient conditions is of special interest for safety reasons. Despite this, mechanistic models that reflect the fission gas transport processes and reliably predict the evolution of ...
Although the supercritical-pressure or high-performance light water reactor (HPLWR) concept is largely based on the well-established technological experience available with conventional light water reactors, there is still no consensus on various key desig ...
The electromagnetic standing wave effect can become the main source of nonuniformity limiting the use of very high frequency in large area reactors exceeding 1 m(2) required for industrial applications. Recently, it has been proposed and shown experimental ...
One of the main goals of the FAST project at PSI is to establish a unique analytical code capability for the core and safety analysis of advanced critical (and sub-critical) fast-spectrum systems for a wide range of different coolants. Both static and tran ...
The design of modern BWR assemblies is governed by general requirements such as safe and reliable performance, optimal fuel utilization and cycle length, and a high degree of flexibility in reactor operation. These requirements are fulfilled via the use of ...
Measurements in the CROCUS reactor at EPFL, Lausanne, are reported for the critical water level and the inverse reactor period for several different sets of delayed supercritical conditions. The experimental configurations were also calculated by four diff ...
For many years various countries with access to commercial reprocessing services have been routinely recycling plutonium as UO2/PuO 2 mixed oxide (MOX) fuel in light water reactors (LWRs). This LWR MOX recycle strategy is still widely regarded as an interi ...
The deployment of a suitable, Pu-bearing inert matrix fuel (IMF) could offer an attractive option as a single-recycling LWR strategy aimed at reducing the currently growing plutonium stockpiles. A development programme focusing on yttria stabilized zirconi ...
