Fission Rates Measured Using High-Energy Gamma-Rays from Short Half-Life Fission Products in Fresh and Spent Nuclear Fuel
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Characterisation of the SVEA-96 Optima2 boiling water reactor assembly, in terms of the radial distributions of normalised total fission and 238U capture rates, is reported at its central elevation, i.e. at the 92-pin section, where the one-third part-leng ...
Miniature and sub-miniature samples were used for determination of mechanical properties of materials for advanced fission plants. Results from indentation and focused ion beam prepared micro-samples, punch tests and thin strip (irradiation) creep tests ar ...
The morphology of single PWR UO2 fuel rods has been investigated by employing computerised gamma-ray transmission tomography. Four highly burnt fuel rods of different burnups (from 52 GWd/t to 126GWd/t) and a fresh rod have been investigated. This paper de ...
The safe and economic operation of nuclear power plants (NPPs) requires that the behaviour and performance of the fuel can be calculated reliably over its expected lifetime. This requires highly developed codes that treat the nuclear fuel in a general mann ...
The improvement of the "radiological cleanliness" of nuclear energy is a primary goal in the development of advanced reactors and fuel cycles. The multiple recycling of actinides in advanced nuclear systems with fast neutron spectra represents a key option ...
Non-destructive and destructive methods have been compared to validate their corresponding assessed accuracies in the measurement of 134Cs/137Cs and 154Eu/137Cs isotopic concentration ratios in four spent UO2 fuel samples with very high (52 and 71 GWd/t) a ...
The growth of the porosity in high-burnup fuel is of particular interest when considering the effect of fission gas retention within the high-burnup structure (HBS). A mechanistic model of porosity growth under annealing conditions for light water reactor ...
Until about the year 2030, current-day nuclear power plants (NPPs) will be replaced by so-called Gen-III or Gen-III+ units, which are mainly based on light water reactor technology. The principal new features are increased safety and improved economical ef ...
As part of a joint research programme between the Paul Scherrer Institute (PSI) and swissnuclear, with the co-operation of the Leibstadt nuclear power plant in Switzerland and fuel suppliers Westinghouse Sweden, measurements and calculations have been made ...
Current fuel management strategies for light water reactors (LWRs), in countries with high back-end costs, progressively extend the discharge burnup at the expense of increasing the 235U enrichment of the fresh UO2 fuel loaded. In this perspective, standar ...
