Publications associées à Internal electric field and fill factor of amorphous silicon (a-Si:H) solar cells

Linking simulation and synthesis of nickel oxide hole-selective contacts for silicon heterojunction solar cells

Christophe Ballif, Mathieu Gérard Boccard, Jan Haschke, Angela Nicole Fioretti, Rachel Emma Woods-Robinson

In silicon heterojunction (SHJ) solar cells, one factor limiting efficiency is "parasitic absorption" from amorphous silicon (a-Si) at the front surface. Thus, discovery of a transparent hole-selective contact to replace p-type a-Si is a promising area of ...

IEEE2020

High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications

Mathieu Gérard Boccard, Yining Li

Photovoltaic (PV) technology offers an economic and sustainable solution to the challenge of increasing energy demand in times of global warming. The world PV market is currently dominated by the homo-junction crystalline silicon (c-Si) PV technology based ...

2020

Optimization of front SiNx/ITO stacks for high-efficiency two-side contacted c-Si solar cells with co-annealed front and rear passivating contacts

Christophe Ballif, Franz-Josef Haug, Xavier Niquille, Andrea Ingenito, Sylvain Nicolay, Frank Meyer

In this contribution, we present an electron selective passivating contact metallised with a low temperature process to target front side applications in crystalline silicon (c-Si) solar cells. In addition to an interfacial silicon oxide (SiOx) and an in-s ...

2020

Impact of the Oxygen Content on the Optoelectronic Properties of the Indium-Tin-Oxide Based Transparent Electrodes for Silicon Heterojunction Solar Cells

Christophe Ballif, Mathieu Gérard Boccard, Jan Haschke, Jean Cattin, Brahim Aissa, Akshath Raghu Shetty

Amorphous/crystalline silicon heterojunction (SHJ) solar cells technology is attracting tremendous attention in recent years due to its potential to achieve high power conversion efficiencies at low fabrication temperatures and using few process steps. How ...

AMER INST PHYSICS2019

Defect passivation in zinc tin oxide: improving the transparency-conductivity trade-off and comparing with indium-based materials

Oscar Esteban Rucavado Leandro

Transparent conductive oxides (TCOs) are essential in technologies coupling light and electricity. Due to their good optoelectronic properties and the production scalability, Sn-doped indium oxide (In2O3:Sn) is the preferred TCO in industrial applications. ...

EPFL2019

Annealing of Silicon Heterojunction Solar Cells: Interplay of Solar Cell and Indium Tin Oxide Properties

Christophe Ballif, Raphaël François Lemerle, Mathieu Gérard Boccard, Jan Haschke, Brahim Aissa

In this paper, we report the evolution of silicon heterojunction solar cell properties focusing, in particular, on the indium tin oxide (ITO) layers upon consecutive thermal annealing. We find that the charge carrier density

N_{\rm e}

of the ITO increase ...

2019

Structural and microstructural studies on SiC-SiO2 ceramic composites

Ho-Yun Lee

In this study, SiC ceramic substrates were prepared with 99.5% silicon carbide powders which were came from waste silicon mud during the manufacturing process of solar cells. It is found that a SiO2 layer with 50 nm in thickness is present on the SiC surfa ...

2019

Stability in 3D and 2D/3D hybrid perovskite solar cells studied by EFISHG and IS techniques under light and heat soaking

Mohammad Khaja Nazeeruddin, Sanghyun Paek, Kyung Taek Cho, Zubair Ahmad

We investigate the effect of temperature and light soaking on the stability and charge carrier behavior in triple cation 3-Dimensional (3D) and 2-Dimensional (2D)/3-Dimensional perovskite solar cells (PSCs) using electric field induced second harmonic gene ...

ELSEVIER SCIENCE BV2019

On‐chip technology for single‐cell arraying, electrorotation‐based analysis and selective release

Carlotta Guiducci, Samuel Kilchenmann, Kevin Keim, Paul Karoly Otto Ery, Mohamed Zakarya Alsaid Ali Rashed

This paper reports a method for label-free single-cell biophysical analysis of multiple cells trapped in suspension by electrokinetic forces. Tri-dimensional pillar electrodes arranged along the width of a microfluidic chamber define actuators for single c ...

2019

Full-Area Passivating Contacts with High and Low Thermal Budgets: Solutions for High Efficiency c-Si Solar Cells

Gizem Nogay

Today more than 90% of the global PV market is covered by c-Si solar cells which are limited by recombination losses at the metal-semiconductor interface. This recombination path can be avoided by separating the metal from the c-Si wafer by introducing a b ...

EPFL2018

Internal electric field and fill factor of amorphous silicon (a-Si:H) solar cells

Graph Chatbot

Chattez avec Graph Search

Linking simulation and synthesis of nickel oxide hole-selective contacts for silicon heterojunction solar cells

High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications

Optimization of front SiNx/ITO stacks for high-efficiency two-side contacted c-Si solar cells with co-annealed front and rear passivating contacts

Impact of the Oxygen Content on the Optoelectronic Properties of the Indium-Tin-Oxide Based Transparent Electrodes for Silicon Heterojunction Solar Cells

Defect passivation in zinc tin oxide: improving the transparency-conductivity trade-off and comparing with indium-based materials

Annealing of Silicon Heterojunction Solar Cells: Interplay of Solar Cell and Indium Tin Oxide Properties

Structural and microstructural studies on SiC-SiO2 ceramic composites

Stability in 3D and 2D/3D hybrid perovskite solar cells studied by EFISHG and IS techniques under light and heat soaking

On‐chip technology for single‐cell arraying, electrorotation‐based analysis and selective release

Full-Area Passivating Contacts with High and Low Thermal Budgets: Solutions for High Efficiency c-Si Solar Cells

Optimization of front SiNx/ITO stacks for high-efficiency two-side contacted c-Si solar cells with co-annealed front and rear passivating contacts

On‐chip technology for single‐cell arraying, electrorotation‐based analysis and selective release

High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications

Full-Area Passivating Contacts with High and Low Thermal Budgets: Solutions for High Efficiency c-Si Solar Cells

Linking simulation and synthesis of nickel oxide hole-selective contacts for silicon heterojunction solar cells

Defect passivation in zinc tin oxide: improving the transparency-conductivity trade-off and comparing with indium-based materials

Annealing of Silicon Heterojunction Solar Cells: Interplay of Solar Cell and Indium Tin Oxide Properties

Impact of the Oxygen Content on the Optoelectronic Properties of the Indium-Tin-Oxide Based Transparent Electrodes for Silicon Heterojunction Solar Cells

Stability in 3D and 2D/3D hybrid perovskite solar cells studied by EFISHG and IS techniques under light and heat soaking

Structural and microstructural studies on SiC-SiO2 ceramic composites