Influence of the elastic properties of the phases on the coefficient of thermal expansion of a metal matrix composite
Publications associées (47)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A waterborne latex-based technique, in which functionalized laponite is attached to PS and acrylic latex particles, is used to prepare films containing up to 50 wt% laponite. At high laponite contents this leads to a cellular arrangement of the laponite-ri ...
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
The behaviour of brittle matrix fibre reinforced-composites is dependent of the properties of its constituents (fibre, matrix and fibre-matrix interface) and is affected by the mechanical and environmental loads. The fracture of a unidirectional composite ...
Hydrocephalus is a brain disease wherein the ventricles dilate and compress the parenchyma towards the skull. It is primarily characterized by the disruption of the cerebrospinal fluid (CSF) flow within the ventricular system. Normal pressure hydrocephalus ...
This research project experimentally and numerically investigates the growth and coalescence of pre-existing voids for a wide range of stress states in a ductile matrix with a special focus on shear dominated loading conditions and presents quantitative ki ...
Microcellular Al-4.5 wt pct Cu of 400- or 75-mu m average pore diameter is solidified at cooling rates ranging from -30 K/min to -0.45 K/min (-30 A degrees C/min to -0.45 A degrees C/min). In the 400-mu m pore size samples, the dendritic character is lost, ...
Pore-free composites combining alumina particles within a matrix of pure aluminium are produced by pressure infiltration, varying systematically the degree of the contiguity, beta, of the ceramic phase by sintering prior to infiltration. The thermal expans ...
Al/SiC composites with volume fractions of SiC between 0.55 and 0.71 were made from identical tapped and vibrated powder preforms by squeeze casting (SC) and by two different setups for gas pressure infiltration (GPI), one that allows short (1-2 min) liqui ...
The resistivity dependence on temperature of composite resistors made of carbon fillers dispersed in an organic matrix are known to be strongly affected by the matrix thermal expansion. High positive temperature coefficient (PTC) effects, i.e. essentially ...
Several magnesium matrix composites were investigated by means of mechanical spectroscopy. A modulus anomaly has been observed in the composites reinforced with fibers while the phenomenon does not occur with particles. This effect is attributed to bonding ...