Influence of the elastic properties of the phases on the coefficient of thermal expansion of a metal matrix composite
Related publications (47)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The behaviour of brittle matrix fibre reinforced-composites is dependent of the properties of its constituents (fibre, matrix and fibre-matrix interface) and is affected by the mechanical and environmental loads. The fracture of a unidirectional composite ...
Pore-free composites combining alumina particles within a matrix of pure aluminium are produced by pressure infiltration, varying systematically the degree of the contiguity, beta, of the ceramic phase by sintering prior to infiltration. The thermal expans ...
Several magnesium matrix composites were investigated by means of mechanical spectroscopy. A modulus anomaly has been observed in the composites reinforced with fibers while the phenomenon does not occur with particles. This effect is attributed to bonding ...
This research project experimentally and numerically investigates the growth and coalescence of pre-existing voids for a wide range of stress states in a ductile matrix with a special focus on shear dominated loading conditions and presents quantitative ki ...
The resistivity dependence on temperature of composite resistors made of carbon fillers dispersed in an organic matrix are known to be strongly affected by the matrix thermal expansion. High positive temperature coefficient (PTC) effects, i.e. essentially ...
Microcellular Al-4.5 wt pct Cu of 400- or 75-mu m average pore diameter is solidified at cooling rates ranging from -30 K/min to -0.45 K/min (-30 A degrees C/min to -0.45 A degrees C/min). In the 400-mu m pore size samples, the dendritic character is lost, ...
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
Al/SiC composites with volume fractions of SiC between 0.55 and 0.71 were made from identical tapped and vibrated powder preforms by squeeze casting (SC) and by two different setups for gas pressure infiltration (GPI), one that allows short (1-2 min) liqui ...
Hydrocephalus is a brain disease wherein the ventricles dilate and compress the parenchyma towards the skull. It is primarily characterized by the disruption of the cerebrospinal fluid (CSF) flow within the ventricular system. Normal pressure hydrocephalus ...
A waterborne latex-based technique, in which functionalized laponite is attached to PS and acrylic latex particles, is used to prepare films containing up to 50 wt% laponite. At high laponite contents this leads to a cellular arrangement of the laponite-ri ...