STUDY ON HIGH TEMPERATURE DEFORMATION CHARACTERISTICS OF Cu-0.23%Al2O3 DISPERSION-STRENGTHENED COPPER ALLOY
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Activation volumes characteristic of room temperature compressive plastic deformation in Au- 45.2 at.% Cu- 1.7 at.% Pt, a near-AuCu alloy that orders to a fully L1(0) structure, are measured using the repeated stress-relaxation method. Four different order ...
The strain softening behavior of a particle-containing copper alloy and the associated microstructure changes were investigated as a function of strain rate (epsilon) over dot and analyzed by modeling. It is shown that, increasing strain rate (epsilon) ove ...
The aim of this paper is to report the very first in situ observations of the deformation behaviour of an Al-Cu alloy in the semisolid state by using ultrafast, high-resolution X-ray microtomography. It is shown that this deformation is non-homogeneous and ...
In this paper, the behaviour of the tantalum subjected to a complex range of thermomechanical solicitations is studied and modelled. The objective of this work is the prediction of microstructure evolution of a tantalum part that is cold flow-formed, then ...
The compatibility of polydimethylsiloxane (PDMS) channels with certain solvents is a well known problem of soft lithography techniques, in particular when it leads to the swelling of the PDMS blocks. However, little is known about the modification of micro ...
Polycrystalline materials with crystallite diameters below hundred nanometer exhibit extraordinary strength which goes along with a decrease in ductility. In order to tailor tough materials, which combine strength and ductility, the underlying deformation ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
The tribocorrosion behaviour of a 304L stainless steel/alumina contact was investigated in sulphuric acid at two imposed potentials (cathodic and passive) The metal deformation below the surface was investigated by analyzing cross sections using secondary ...
Neutron and synchrotron X-ray diffraction spectra have been acquired during room temperature tensile deformation of a creep-resistant bainitic 1% CrMoV steel, in order to study the evolution of internal microstresses and load-sharing mechanisms between the ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
