Application of the Rappaz-Drezet-Gremaud Hot Tearing Criterion to Welding of Aluminium Alloys
Publications associées (86)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Open-pore replicated microcellular 99.99% pure aluminium is tested in tensile creep, varying the temperature from 150 to 450 degrees C, the applied stress from 0.15 to 0.5 MPa, and the relative density from 0.14 to 0.28. Tensile creep curves are of classic ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
Mean index changes up to 2.2 × 10-3 were demonstrated in hydrogen loaded germanium free Bi-Al-doped silica fibers. Tensile stress changes indicate a contribution of compaction to the total index change. ...
Degradation of mechanical properties due to nanometric irradiation induced defects is one of the challenging issues in designing ferritic materials for future nuclear fusion reactors. Various types of defects, namely dislocation loops, voids, He bubbles an ...
We demonstrate that irradiation may enhance the plasticity in metallic glasses by increasing the free-volume content via micropillar compression experiments on an ion-irradiated bulk metallic glass (BMG). Results show that irradiation decreases the flow st ...
Cu-Ni-Sn alloys with Pb additions exhibit high mechanical strength at room temperature coupled with good machinability but experience a significant ductility loss above the melting point of lead. We explore here the influence of minor additions of Al, Mn, ...
Solders are widely used as interconnect material for the electronic industry. The solder interconnect provides both electrical contact and mechanical connection between the integrated circuit devices and their substrate. Thus solders with good reliability ...
Bone is considered in two different composite mechanics frameworks: first as an organic inorganic two phase composite, and second as a fluid-saturated porous solid. Experimental data from previous studies, in which the mechanical responses of bone or colla ...
In order to better understand the microstructure that forms during laser welding of an 18 carat gold and an austenitic stainless steel, solidification of the Au-Fe binary analog has been studied using thermal analysis and interrupted Bridgman experiments. ...
The Haasen plot (inverse activation area 1/Delta alpha vs. offset flow stress sigma-sigma(s)) for solute-strengthened alloys is usually assumed additive, 1/Delta alpha = 1/Delta alpha(s) + 1/Delta alpha(f), with 1/Delta alpha(f) similar to beta(sigma-sigma ...