Estimating localised corrosion resistance of low alloy stainless steels: comparison of pitting potentials and critical pitting temperatures measured on lean duplex stainless steel LDX 2101 after sensitisation
Publications associées (32)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The deterioration of reinforced concrete structures and the associated rehabilitation work represent an economic cost of premier importance. In Switzerland, the structural maintenance expenditures amount to 40% to 65% of the initial construction cost (over ...
Ferritic/martensitic (FM) steels, F82H and Optimax-A, were irradiated up to 11.3 dpa/1175 appm He in Target-3 of the Swiss Spallation Neutron Source (SINQ). To investigate helium-induced hardening effect, micro-hardness and microstructure of the irradiated ...
Investigation of the microstructure, properties and biocompatibility of the Ti-6Al-4V alloy nitrided under glow discharge was performed. The microstructural analyses were carried out using light microscopy, X-ray diffraction, analytical scanning and transm ...
Bonding between polyolefins and steel is widely found in applications as diverse as steel wire/cord reinforced polymers, and automotive components where steel and thermoplastics are commonly used. As polyolefins are highly unreactive, because of their low ...
The anodic dissolution of 100Cr6 steel in neutral electrolytes containing sodium chloride and sodium nitrate was investigated potentiodynamically and galvanodynamically with a rotating disc electrode at room temperature. The total concentration of the mixe ...
The aim of this work is to examine the possibility of high performance pressure sensors based on piezoresistive thick films deposited on steel membranes, which combine the performance advantage of thin-film sensors (high-strength steel substrates, assembly ...
This work is motivated by the industrial need to improve the thermal treatments of carbon steels used for the production of files. It aims at clearly defining the role that carbon plays in hardness and wear resistance of files. Three steel grades with diff ...
The goal of this project was to develop low-firing thick-film materials systems for the fabrication of piezoresistive sensors on special steels, for the fabrication of instrumented medical devices. To this end, a series of individual thick-film materials a ...
This work is focussed on a high carbon tool steel used for the production of files. The mechanical properties of the files depend on a hardening thermal treatment that produces a martensitic structure. Thus, the motivation for this work is technological: w ...
The management of existing road infrastructures is a multidisciplinary activity that involves structural engineering, material science, management, economics and ecology. The objective is to achieve maximum availability of road links at minimum societal co ...