Film photovoltaïqueUn film photovoltaïque ou cellule solaire en couche mince ou encore couche mince photovoltaïque est une technologie de cellules photovoltaïques de deuxième génération, consistant à l'incorporation d'une ou plusieurs couches minces (ou TF pour ) de matériau photovoltaïque sur un substrat, tel que du verre, du plastique ou du métal. Les couches minces photovoltaïques commercialisées actuellement utilisent plusieurs matières, notamment le tellurure de cadmium (de formule CdTe), le diséléniure de cuivre-indium-gallium (CIGS) et le silicium amorphe (a-Si, TF-Si).
Transverse modeA transverse mode of electromagnetic radiation is a particular electromagnetic field pattern of the radiation in the plane perpendicular (i.e., transverse) to the radiation's propagation direction. Transverse modes occur in radio waves and microwaves confined to a waveguide, and also in light waves in an optical fiber and in a laser's optical resonator. Transverse modes occur because of boundary conditions imposed on the wave by the waveguide.
Crystalline siliconCrystalline silicon or (c-Si) Is the crystalline forms of silicon, either polycrystalline silicon (poly-Si, consisting of small crystals), or monocrystalline silicon (mono-Si, a continuous crystal). Crystalline silicon is the dominant semiconducting material used in photovoltaic technology for the production of solar cells. These cells are assembled into solar panels as part of a photovoltaic system to generate solar power from sunlight. In electronics, crystalline silicon is typically the monocrystalline form of silicon, and is used for producing microchips.
Silicon photonicsSilicon photonics is the study and application of photonic systems which use silicon as an optical medium. The silicon is usually patterned with sub-micrometre precision, into microphotonic components. These operate in the infrared, most commonly at the 1.55 micrometre wavelength used by most fiber optic telecommunication systems. The silicon typically lies on top of a layer of silica in what (by analogy with a similar construction in microelectronics) is known as silicon on insulator (SOI).
Cellule photovoltaïqueUne cellule photovoltaïque, ou cellule solaire, est un composant électronique qui, exposé à la lumière, produit de l’électricité grâce à l’effet photovoltaïque. La puissance électrique obtenue est proportionnelle à la puissance lumineuse incidente et elle dépend du rendement de la cellule. Celle-ci délivre une tension continue et un courant la traverse dès qu'elle est connectée à une charge électrique (en général un onduleur, parfois une simple batterie électrique).
Silicium amorpheLe silicium amorphe, généralement abrégé a-Si, est la variété allotropique non cristallisée du silicium, c’est-à-dire dans lequel les atomes sont désordonnés et ne sont pas rangés de façon régulière définissant une structure cristalline. Le silicium amorphe peut être déposé en couches minces à basse température sur un grand nombre de substrats, permettant d'envisager une grande variété d'applications microélectroniques. Ce matériau semi-conducteur est couramment utilisé pour réaliser certains panneaux solaires photovoltaïques.
Silicium polycristallinLe silicium polycristallin, aussi couramment appelé polysilicium ou poly-Si est une forme particulière du silicium, qui se différencie du silicium monocristallin et du silicium amorphe. Contrairement au premier (composé d'un seul cristal) et au second (n'ayant aucune ou une très faible cohérence cristallographique), le silicium polycristallin est constitué de multiples petits cristaux de tailles et de formes variées, qui lui confèrent des propriétés différentes des deux autres formes.
Monocrystalline siliconMonocrystalline silicon, more often called single-crystal silicon, in short mono c-Si or mono-Si, is the base material for silicon-based discrete components and integrated circuits used in virtually all modern electronic equipment. Mono-Si also serves as a photovoltaic, light-absorbing material in the manufacture of solar cells. It consists of silicon in which the crystal lattice of the entire solid is continuous, unbroken to its edges, and free of any grain boundaries (i.e. a single crystal).
Laser absorption spectrometryLaser absorption spectrometry (LAS) refers to techniques that use lasers to assess the concentration or amount of a species in gas phase by absorption spectrometry (AS). Optical spectroscopic techniques in general, and laser-based techniques in particular, have a great potential for detection and monitoring of constituents in gas phase. They combine a number of important properties, e.g. a high sensitivity and a high selectivity with non-intrusive and remote sensing capabilities.
Waveguide filterA waveguide filter is an electronic filter constructed with waveguide technology. Waveguides are hollow metal conduits inside which an electromagnetic wave may be transmitted. Filters are devices used to allow signals at some frequencies to pass (the passband), while others are rejected (the stopband). Filters are a basic component of electronic engineering designs and have numerous applications. These include selection of signals and limitation of noise.