Sub-centimetre Spatial Resolution in Distributed Fibre Sensing, based on Dynamic Brillouin Grating in Optical Fibers

Sang Hoon Chin, Nikolay Primerov, Luc Thévenaz
2012
Article

Résumé

Optical fibre sensors based on stimulated Brillouin scattering in optical fibers have now clearly demonstrated their excellent capability for long-range distributed strain and temperature measurements. The fibre is used as sensing element and a value for temperature and/or strain can be obtained from any point along the fibre. While the spatial resolution of classical configurations is practically limited to 1 meter by the phonon lifetime, novel approaches have been demonstrated these past years that can overcome this limit. In this paper, this could be achieved by two physical processes: prior activation of a steady acoustic wave through the classical Brillouin interaction between two Brillouin pumps, and interrogation by Bragg reflection on the acoustic wave using a distinct ultra-short pulse in a highly birefringent fiber.We could achieve a spatial resolution below one centimetre, while preserving the full accuracy on the determination of temperature and strain.

Official source

https://infoscience.epfl.ch/record/167203?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Recent progress towards centimetric spatial resolution in distributed fibre sensing

Sang Hoon Chin, Stella Foaleng Mafang, Nikolay Primerov, Kwang-Yong Song, Luc Thévenaz

Optical fibre sensors based on stimulated Brillouin scattering have now clearly demonstrated their excellent capability for long-range distributed strain and temperature measurements. The fibre is used as sensing element and a value for temperature and/or strain can be obtained from any point along the fibre. While classical configurations have practically a spatial resolution limited by the phonon lifetime to 1 meter, novel approaches have been demonstrated these past years that can overcome this limit. This can be achieved either by the prior activation of the acoustic wave by a long lasting pre-pumping signal, leading to the optimized configuration using Brillouin echoes, or by probing a classically generated steady acoustic wave using a ultra-short pulse propagating in the orthogonal polarization of a highly birefringent fibre. These novel configurations can offer spatial resolutions in the centimetre range, while preserving the full accuracy on the determination of temperature and strain.

The International Society for Optical Engineering2010

Chargement

Owing to the advantages of the optical fibre, such as lightweight, small size, low cost and immunity to electromagnetic interferences, the fibre sensors have been applied in diverse fields and the scientific research on fibre sensing keeps improving to meet new industrial demands. In this thesis, a novel distributed fibre sensor based on coherent Rayleigh scattering is investigated to realise best accuracy measurements. Coherent Rayleigh scattering is found to be essentially assimilated to a random walk process, thus its statistical properties are theoretically analysed based on the mature theory on random walk. Then the spectral characteristics of the Rayleigh backscattered light is investigated for different incident pulse shapes. The spectral distribution of the trace amplitude turns out to be identical to the spectrum of the incident pulse. Meanwhile, a theoretical model is proposed to describe the coherent Rayleigh trace in time and frequency domains. Experiments are carried out to validate the theoretical analysis and the proposed model. Then the statistical properties and the visibility of the coherent Rayleigh traces obtained by experiment and simulation are investigated for different detection bandwidth. The minimum 3 dB bandwidth required to resolve all features of a coherent Rayleigh intensity trace is determined to be 3 times larger than the bandwidth of the incident rectangular pulse. Then coherent Rayleigh scattering is applied to distributed sensing using the optical time domain reflectometry technique. The working principle is explained by the restorability of the Rayleigh trace in time domain and by a spectral shift in frequency domain. The temperature sensitivity is calculated over a wide range from 300 K down to 4.5 K based on the thermo-optic effect and the thermal expansion of the silica fibre. The experimental results in a standard fibre with acrylate coating and a fibre specially coated with ORMOCER® confirm the high temperature sensitivity (over 1 GHz/K) and demonstrate a temperature resolution in the milliKelvin range even under cryogenic conditions. The fibre with the ORMOCER® coating exhibits a higher temperature sensitivity at room temperature than the acrylate coated fibre due to the extra strain induced by the temperate change in the coating and a more stable sensing behaviour because the polymers forming the coating stabilise the mechanical and thermal responses of the fibre. The sensors based on coherent Rayleigh scattering are also applied to retrieve the phase birefringence distribution along polarisation-maintaining and standard single mode fibres. The minimum detectable birefringence reaches 3×10¿7 when the spatial resolution is 2 m and even smaller value can be resolved using longer optical pulses. In addition, this birefringence measurement is capable of distributed temperature and strain sensing in a PANDA and an elliptical-core polarisation-maintaining fibres since the birefringence is sensitive to environmental variations. The experimental results demonstrate that this method is one order of magnitude more sensitive than a fibre sensor based on Brillouin scattering. Moreover, discriminated temperature and strain sensing is realised by a combination of this birefringence measurement and a standard COTDR sensor. This thesis is concluded by a discussion of further research directions on coherent Rayleigh scattering based distributed sensing.

EPFL2016

Chargement

La diffusion Brillouin dans les fibres optiques

Among all non-linear optical effects observed in single-mode optical fibres, stimulated Brillouin scattering (SBS) is of particular importance since it has numerous practical implications. SBS occurs when laser waves are scattered through the interaction of light with hypersonic acoustic waves in the medium. It manifests through the generation of a backscattered Stokes wave that carries most of the input optical power once a definite intensity level is reached within the fibre core. It limits the maximum optical power that can be transmitted through an optical fibre and therefore can cause a severe penality for fibre optics telecommunications. The backscattered Stokes wave is down shifted in frequency with respect to the incident lightwave frequency. This frequency shift – often called the Brillouin frequency shift – depends on the fibre parameters and on the wavelength of the incident light. It is directly proportional to the acoustic velocity and ranges from 12 to 13 GHz for silica fibres at a 1.3 µm wavelength. The Brillouin frequency shift is also very sensitive to environmental quantities changing the acoustic velocity such as temperature and strain. This feature makes SBS very interesting for temperature and strain monitoring in optical fibres and has been used in the design of fibre optics sensors. In the present work, a novel method to measure SBS characteristics in single-mode optical fibres has been developed. It is based on the so-called pump and probe technique using two counterpropagating optical waves within the test fibre. It basically presents the originality to require only one laser source and relies on an electro-optic modulator to generate the probe signal by microwave modulation of the pump light. The inherent high stability of the experimental set-up has made possible the characterisation of different fibres in terms of SBS parameters with a higher accuracy than the traditional two lasers set-up. The influence of dopant concentration in silica fibres on the SBS properties has been fully characterised. Furthermore it has been determined that the presence of core dopants decreases the acoustic velocity resulting in a smaller Brillouin frequency shift. The temperature and strain effects on the SBS characteristics have been extensively investigated. The problem of the evolution of the polarisation of the interacting lightwaves has been studied and a model clarified the so far unexplained behaviour in low birefringence fibres. A new measurement procedure has been defined to achieve polarisation-independent Brillouin gain determination. The second facet of the present thesis deals with the concept of distributed fibre optics sensors based on SBS. The determination of the Brillouin frequency shift gives access to the temperature or strain experienced by the fibre, while a modified OTDR technique provides the information on the position. Here again the use of a single laser source together with an electro-optic modulator brings several advantages. Besides the convenient flexibility in the generation of the probe signal, it makes possible to pulse the optical signals to localise the interaction within the test fibre. The overall temperature or strain distribution of the test fibre can be carried out by measuring the Brillouin frequency shift at any locations throughout the test fibre. A sensor has been experimentally achieved and its performances can be summarised as follow: spatial resolution less than 10 meters over more than 10 kilometres, with a resolution on the Brillouin frequency determination of 1 MHz, that corresponds to a ±1°C temperature resolution or to a 2x10-5 strain resolution. The dynamic range can be increased up to 30 kilometres to the detriment of the spatial resolution. The ultimate performances of the SBS distributed fibre optics sensors have been investigated in terms of spatial resolution and dynamic range. It turns out that these sensors are eventually dedicated to distributed measurements over several tens of kilometres with a spatial resolution limited to the meter range. Finally two practical applications of such sensors are described: the measurement of the strain distribution in installed fibre optics cables for telecommunications and the temperature monitoring of electrical energy distribution cables. On site measurements using a Brillouin sensor have been performed for the first time thanks to the high stability and reliability of the sensor.

EPFL1997

Chargement

EPFL2016

La diffusion Brillouin dans les fibres optiques

EPFL1997