Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
For the design of SFRC members, the most fundamental material property is its post cracking residual tensile strength. When relying on physical models to describe structural behaviour under load, the material laws must first be accurately established. If t ...
VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-82013
Reinforced concrete flat slabs are extensively used in buildings and parking garages. Their design is governed by deflection at the serviceability limit state and punching shear at the ultimate limit state. When no punching shear reinforcement is provided, ...
Punching of flat slabs without transverse reinforcement has mostly been investigated in the past for slabs with equal reinforcement ratios in the two directions and loaded under axis-symmetrical conditions. However, in practice, slab bridges as well as man ...
Punching shear of reinforced concrete flat slabs supported on columns is a failure mode in which the slab fractures around the column. This type of failure is sudden and can be catastrophic in nature. Punching shear generally governs the ultimate limit sta ...
The paper presents results from an experimental and analytical study of interior columns subjected to punching in the presence of an unbalanced moment. The moment, characterized in the study by an eccentricity of the load in the column, is shown to have a ...
In multi-storey buildings, columns are usually not continuous through the slabs to enhance ease of construction. Consequently, in slab–column joints, slabs have to carry column loads in addition to the shear and bending moments due to loads applied to the ...
Flat slabs are commonly used in buildings due to their easiness of construction and economy. In order to keep these advantages, columns are usually not continuous through the slabs in multi-storey buildings. In these cases, the slabs are subjected to large ...
The design of reinforced and prestressed concrete girders is usually performed so as to avoid any non ductile failure mode. Amongst these failure modes, one of the most undesirable occurs by crushing of concrete in the web. To avoid this brittle type of fa ...
Currently, there is no generally-accepted theory giving a physical explanation of the shear strength in one- and two-way slabs. Furthermore, for members without transverse reinforcement, shear strength is estimated in most codes of practice following empir ...
Most analytical approaches and available test data for punching shear in flat slabs assume axis-symmetrical conditions, which seems realistic for representing slabs supported on columns equally spaced in both orthogonal directions. However, in practice, th ...