Appraisal of Core Analysis Methods against Zero-Power Experiments on Full-Scale BWR Fuel Assemblies
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The GFR (Gas cooled Fast Reactor) combines the advantages of a fast neutron spectrum with those of high temperatures. Given the high core outlet temperatures exceeding 800 C, it is clear that conventional metallic core structures and fuel cladding will be ...
Computerised gamma-ray emission tomography has been applied to single PWR UO2 fuel rods, with pellet averaged burnups of 52, 71, 91 and 126 GWd/t respectively, for the determination of 134Cs, 137Cs and 154Eu internal radial distributions. State-of-the-art ...
Radial distributions of the total fission rate and the238U- capture-to-total-fission (C 8/F tot) ratio were measured in SVEA-96+ and SVEA-96 Optimal assemblies during the LWR-PROTEUS program. Fission rates predicted using MCNPX with JEFF-3.1 cross sections ...
Miniature and sub-miniature samples were used for determination of mechanical properties of materials for advanced fission plants. Results from indentation and focused ion beam prepared micro-samples, punch tests and thin strip (irradiation) creep tests ar ...
This paper presents the development and application of a methodology to estimate, using conventional deterministic lattice/core analysis methods, the fast neutron fluence at the tips of control rods inserted during operation in PWR reactors. The developed ...
Two zirconium alloys (Zr-2.5%Nb) - one oxidized in a pressurized water reactor, the other oxidized in autoclave and used as reference - are analyzed by combining synchrotron-based scanning transmission and fluorescence X-ray microscopy and micro-X-ray abso ...
A boiling water reactor SVEA-96+ fresh fuel lattice has been used as the basis for a benchmark study of the void reactivity coefficient at assembly level in the full voidage range. Results have been obtained using the deterministic codes CASMO-4, HELIOS, P ...
This letter extends the work performed at Argonne National Laboratory on the QUADRISO fuel particles concept for High Temperature Reactors. Different configurations of the QUADRISO fuel particles concept are proposed and examined. The concept of QUADRISO f ...
Until about the year 2030, current-day nuclear power plants (NPPs) will be replaced by so-called Gen-III or Gen-III+ units, which are mainly based on light water reactor technology. The principal new features are increased safety and improved economical ef ...
The recent experimental programme conducted in the PROTEUS research reactor at the Paul Scherrer Institute (PSI) has concerned detailed investigations of advanced light water reactor (LWR) fuels. More than fifteen different configurations of the multi-zone ...
