Influence of chelating agents on the tribocorrosion of tungsten in sulphuric acid solution
Publications associées (32)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Electrochemical and friction measurements during unidirectional sliding tests are used to monitor and to evaluate the tribocorrosion behavior of a passivating material. Tribocorrosion is the interplay between chemical, electrochemical, and mechanical proce ...
Can microbes be used to preserve archaeological iron objects? Lucrezia Comensolia, J. Maillardb, P. Juniera and E. Josepha,c a Laboratory of Microbiology, Institute of Biology University of Neuchâtel, Switzerland b Laboratory for Environmental Biotechnolog ...
The effect of body fluids inorganic species on element-specific dissolution of a Mg-Y-Rare earth elements (RE) alloy was investigated by flow microcapillary plasma mass spectrometry. A new important aspect of this method is the online monitoring of precipi ...
The corrosion behaviour and the wear ranking of biomedical high carbon (HC) and low carbon (LC) CoCrMo alloys sliding against an alumina ball in four different simulated body fluids [NaCl and phosphate buffered solutions (PBS) with and without albumin] has ...
The determination of polar organic contaminants (pesticides, pharmaceuticals and inhibitors of corrosion) in river water was carried out using POCIS as a passive sampling technique and UPLC-MS/MS as a determination technique. Several compounds with propert ...
In the present study, a forged CoCrMo (ISO 5832-12) has been subjected to pulsed plasma treatment in a N-2/H-2 atmosphere at low temperatures (below 500 A degrees C). This treatment resulted in the formation of a layer composed by dispersed chromium nitrid ...
Self-assembled monolayer (SAM) films have attracted immense attention for both fundamental and applied research. A SAM is composed of a large number of molecules with a head group that chemisorbs onto a substrate, a tail group that interacts with the outer ...
The chemical-mechanical polishing process (CMP) is an essential part of the production of integrated circuits. Metal to be polished in the CMP reacts with the oxidants from the aqueous suspension (slurry) and the passive film is formed on the metal surface ...
Investigation of the microstructure, properties and biocompatibility of the Ti-6Al-4V alloy nitrided under glow discharge was performed. The microstructural analyses were carried out using light microscopy, X-ray diffraction, analytical scanning and transm ...
Al-Cr-Fe complex metallic alloys are new intermetallic phases with low surface energy, low friction, and high corrosion resistance down to very low pH values (0-2). Flow microcapillary plasma mass spectrometry under potentiostatic control was used to chara ...