Flow Boiling of R134a in a Multi-Microchannel Heat Sink with Hotspot Heaters for Energy-Efficient Microelectronic CPU Cooling Applications
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper discusses the effect of diameter on both flow boiling heat transfer and transition from macro to microchannel evaporation. A recently proposed three-zone flow boiling model based on evaporation of elongated bubbles in microchannels is briefly de ...
In tune with the falling film evaporation heat transfer test results described in Part 1, flow visualization of the boiling process and intertube flow mode transitions from droplet to column and sheet flows have been observed, and the onset of dryout resul ...
Few experimental test data are available for evaporation of ammonia inside tubes and numerous new data have been measured and presented here. An improved approach to the prediction of flow boiling heat transfer in horizontal tubes has been proposed through ...
Calorimetry has shown real potential at bench-scale for chem. and biochem. processes. The aim of this work was therefore to scale-up the system by adaptation of a std. com. available 300-L pilot-scale bioreactor. To achieve this, all heat flows entering or ...
An improved two-phase flow pattern map is proposed for evaporation in horizontal tubes. Based on new flow pattern data for three different refrigerants covering a wide range of mass velocities, vapor qualities and heat fluxes. The new flow pattern map incl ...
This thesis presents a system approach with the aim to develop improved concepts for small capacity, high temperature lift air-water heat pumps. These are intended to replace fuel fired heating systems in the residential sector, which leads to a major redu ...
For many years, calorimetry has been recognized as a powerful and universal tool for monitoring chem. and biol. processes. A lab.-scale reaction calorimeter (RC1, Mettler-Toledo), initially developed for chem. reaction studies with a sensitivity of 100-150 ...
This study is a contribution for the improvement of horizontal falling film heat exchangers. This type of evaporator has the potential to be widely used in the petrochemical industry, for the sea water desalination, or in the large refrigeration systems. A ...
A new optical void fraction measurement system has been coupled to the existing LTCM flow boiling test facility to obtain dynamic and time-averaged void fractions, simultaneously with measurements of the local heat transfer coefficients. A series of evapor ...
We present Large-Eddy Simulations (LES) of the turbulent compressible flow in a curved and an S-shape duct of square cross section. The aim is to predict the three-dimensional structures which develop inside the cooling channels of heat exchangers and whic ...
