Crack - fiber sensor interaction and characterization of the bridging tractions in mode I delamination

John Botsis, Joël Cugnoni, Samuel Stutz
2011
Article

Résumé

Fiber bridging is regularly encountered in model delamination tests of unidirectional fiber reinforced composites. However, characterization of the bridging tractions is rather difficult. One way to indirectly evaluate the bridging traction distribution is to embed a fiber Bragg grating (FBG) sensor close to the crack tip and to measure the distributed strain along this FBG. The strain measurements from the FBG sensor are used to characterize the fiber bridging tractions by an identification method. In this work, the sensor is embedded in a unidirectional carbon/epoxy composite. Firstly, it is treated as an inclusion near the crack plane and a numerical analysis is performed to study its effect on the measured strain field and energy release rate. The results demonstrate that the sensor, located at about two fiber diameters from the crack plane, has a negligible effect on the fracture process. Secondly, among the identified linear, bilinear, and exponential bridging traction distributions, the exponential one is found to be a suitable model. Characterization of the bridging tractions allows to calculate the energy release due to the bridging fibers G(l)(b) which is similar to the difference between the initiation energy release c, and the propagation value G(l)(p). results also agree with the bridging tractions evaluated from the conventional energy release rate - crack opening displacement method. (C) 2011 Elsevier Ltd. All rights reserved.

Official source

https://infoscience.epfl.ch/record/171494?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

John Botsis, Joël Cugnoni, Samuel Stutz
2011
Article

Résumé

Official source

https://infoscience.epfl.ch/record/171494?ln=fr

À propos de ce résultat

Concepts associés (12)

Concepts associés

Chargement

Publications associées (5)

Publications associées

Chargement

Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite

John Botsis, Joël Cugnoni, Ebrahim Farmand Ashtiani

Large scale bridging is an important toughening mechanism in composite laminates that depends on the specimen geometry as well as the constituent materials. In this work, an iterative approach is applied to identify the effect of specimen thickness on traction-separation behavior in the bridging zone. Double cantilever beam specimens (DCB) with embedded arrays of wavelength-multiplexed fiber Bragg grating (FBG) sensors are subjected to monotonic mode I fracture loading. As processed specimens with thicknesses h = 2, 4, 8 and 10 mm as well as specimens of h = 4 mm milled down from the 8 and 10 mm are tested. Non-homogeneous strain distributions in the vicinity of the interlaminar crack plane are locally monitored by means of embedded FBGs. The measured strain data are used to quantify the bridging tractions associated with each specimen thickness and consequently the energy release rate (ERR) due to the bridging. The results show that the bridging zone length and the ERR at the plateau level increase with specimen thickness while the results for all specimens with h = 4 are the same thus excluding any processing effects. Moreover, the maximum stress of traction-opening in the bridging zone and crack opening displacement at the end of the zone are independent of thickness. In contrast, the rate of tractions decay depends on the specimen thickness in that it decreases with thickness scaling. Thus the so-called bridging law is not a material parameter. The identified traction-separation relations are employed in a cohesive zone model to predict fracture of DCB specimens with different thicknesses. (C) 2014 Elsevier Ltd. All rights reserved.

Elsevier2015

Chargement

Delamination in cross-ply laminates: Identification of traction-separation relations and cohesive zone modeling

David Enrique Alanis Rojas, John Botsis, Joël Cugnoni, Ebrahim Farmand Ashtiani

Identification of traction separation relations is at the forefront of damage and fracture mechanics of composite laminates. Such relations are of particular interest in fracture of laminates consisting of layers of different fiber orientations. In this study, an iterative method based on internal strain measurements and parametric numerical modeling is employed to identify a traction-separation relation in quasi-static mode I dominated delamination of a cross-ply carbon fiber epoxy laminate. The results demonstrate that crack propagation is accompanied by a large bridging zone which is smaller than the zone in a uniaxial composite specimen of the same materials and linear dimensions. While the initiation value of the energy release rate (ERR) is the same, the ERR at steady state propagation and the maximum stress in the bridging zone are respectively 1.7 and 3.1 times larger than the corresponding values of the unidirectional specimen. The obtained traction-separation relation is employed in a cohesive zone model to predict the loading response and crack growth. The adopted approach is a step towards a better understanding of delamination in cross-ply composites. (C) 2015 Elsevier Ltd. All rights reserved.

Elsevier2015

Chargement

, ,

Bridging by intact fibers in composite materials is one of the most important toughening mechanisms. However, a direct experimental assessment of its contribution is not easy to achieve. In this work a semi-experimental method is proposed to quantify its contribution to fracture of unidirectional carbon fiber/epoxy double cantilever beam (DCB) specimens in mode I delamination under monotonic and 1 Hz fatigue loads. In each specimen, an embedded optical fiber with an array of eight wavelength-multiplexed fiber Bragg gratings is used to measure local strains close to the crack plane. The measured strain distribution serves in an inverse identification procedure to determine the tractions in the bridging zone in monotonic and fatigue loads. These tractions are used to calculate the energy release rate (ERR) associated with bridging fibers. The results indicate that the ERR due to bridging is about 40% higher in fatigue. The bridging tractions are further included in a cohesive element model which allows to predict precisely the complete load displacement curve of monotonic DCB tests. Using the principle of superposition and the identified tractions, the total stress intensity factor (SIF) is calculated. The results show that the SIF, at initiation, is very close to the one calculated at crack propagation and bridging by intact fibers is responsible for the entire increase in toughness seen in the DCB specimens used herein. (C) 2010 Elsevier Ltd. All rights reserved.

2011

Chargement