Study of Topoisomerase-DNA Interaction Using Atomic Force Microscopy

The aim of this thesis was to explore the topoisomerase-DNA interactions using atomic force microscopy (AFM) in a liquid environment. Firstly, we present a programmable microcontroller-driven injection system for the exchange of an imaging medium while using AFM. Using this low-noise system, high-resolution imaging can be performed during the process of injection without disturbance. The use of the injection system was put into practice when studying the conformational changes of DNA molecules during the injection of intercalating agents, such as daunorubicin (an anticancer drug) and ethidium bromide, into the fluid chamber. An observation of their mode of interaction with DNA might help elucidating their mechanism of action, thereby facilitating the development of more specific drugs. Part of this thesis deals with the way enzymes interact with DNA molecules. We found that human type II topoisomerases (Topo II) bind preferentially to DNA crossovers. About 50% of the DNA crossings, where the Topo II were bound to, presented an angle of a nearly perpendicular orientation, suggesting a favoured binding geometry in the Topo II recognition. Our studies with AFM also helped us visualize the dynamics of the unknotting action of Topo II in knotted DNA molecules. Additionally we investigated the interactions between Topo II and DNA by applying single molecule force spectroscopy. This study evidenced the inhibitor effect of the aclarubicin (anticancer drug) and evaluated the preferential binding of Topo II to specific DNA supercoiled forms. Finally, we explored the Topo II dynamics using a novel technique that detects motion from nano- to micro-metre sized systems. This method opens new possibilities for the study of conformational changes of single proteins, biochemical reactions, as well as drug-target inhibition.

Investigation of Biophysical Properties of Biomolecules by Means of Atomic Force Microscopy

Jae Sun Jeong

Biomolecules are the building blocks of living organisms and perform the most important functions in a biological process. The aim of biophysics is to understand the biological functions of biomolecules in terms of their structure: structure and function of biomolecules has been an active research for several decades. Despite the evolution and emergence of new investigation techniques during the last 60 years, biological processes still present enormous challenges to our understanding due to the complex biological system spanning a wide range of spatial and temporal scales. An ideal biophysical method should have the capability to observe atomic level structures and dynamics of biological molecules in their physiological environment. It would also permit the visualization of the structures that form throughout the course of conformational changes or chemical reactions, regardless of the time scale. In this thesis, we have investigated two representative biomolecules using the well-defined biophysical methods in terms of behaviour and biophysical properties of biomolecules: Deoxyribonucleic acid (DNA) and the Amyloid-β (Aβ) peptide. Many different biophysical and biochemical tools were employed, where atomic force microscopy (AFM) was the primary instrument to observe the behaviour of the biomolecules in physiological conditions as well as the dynamic changes of structure of biomolecules. Moreover, AFM was used to measure the mechanical properties of biomolecules via direct and indirect methods. What is the behaviour of DNA molecules in an electric field? The behaviour of DNA molecules in an electric field is crucial for understanding interactions of DNA with electrically charged membrane that serves as a template for DNA based sensors and microarray applications, particularly under an electric field. Taken together, the ability to deposit a single DNA molecule on the electrode is essential to increase its specificity. To achieve this, we optimized the operational conditions in order to control a single DNA molecule adsorbing at +300 mV of potential and desorbing to/from the electrode at -25 mV of potential. Simultaneously dynamic imaging enabled us to analyse its morphological behaviour using real-time Electrochemical AFM (EC-AFM) in aqueous conditions. What is the molecular mechanism underlying Aβ42-fibrillogenesis and its role in pathogenesis? The molecular mechanism underlying Aβ42-fibrillogenesis is essential for defining the key determinant in the pathogenesis of Alzheimer’s disease. In this thesis, we carried out detailed biophysical studies to elucidate the structural changes associated with different stages of amyloid formation and provided unique perspectives on the molecular and structural basis underling the polymorphism of amyloid fibrils in Alzheimer’s disease. For the first time, we provided direct evidence of the existence of secondary-nucleation sites on the surfaces of Aβ42-fibrils and demonstrated that Aβ42-monomers play a crucial role in determining the structural properties and heterogeneity of the formed fibrils. In addition, real-time observation with in situ AFM was performed to define the mechanisms underlying oligomerization and the formation of protofibrils of Aβ42 in physiological conditions. Investigation of the elastic property of Aβ42 fibrils using two techniques based on the AFM. The self-assembly process of Aβ peptides into highly ordered amyloid fibrils is a crucial phenomenon in the cascade of pathological events that culminates in Alzheimer’s disease. Further, the assessment of the elastic properties of Aβ fibrils has recently attracted a lot of attention due to their potential biological applications. We measured the elastic property of Aβ42-fibrils immobilized on two types of substrate (positively charged mica and hydrophobic highly oriented pyrolytic graphite) and compared their properties using two techniques based on the AFM: Statistical analysis of thermal fluctuations and AFM based nanoindentation. The results from our studies show that the values of Young’s modulus of Aβ42 fibrils from the two substrates were similar (1.8 to 2.0 GPa), however they were different in the statistical analysis of thermal fluctuations (1.4 GPa, 2.3 GPa on mica and highly oriented pyrolytic graphite, respectively). These results imply that the method of thermal fluctuations was based on the shape of fibrils affected by the interaction force between the substrate and the fibrils.

EPFL2012

Cryo-AFM development for high resolution DNA imaging and spectroscopy

Susana del Carmen Tobenas Borron

The thesis presents the development of a custom made atomic force microscope (AFM) conceived to image biological molecules at low temperatures in ultrahigh vacuum conditions, and its application to DNA single molecule studies. Starting from a first prototype working in contact mode, our aim was to implement non-contact AFM in order to reduce possible sample damaging due to strong tip interactions. The first chapter of the thesis discusses the technical solutions developed to improve the previous system. A complete setup for in situ exchange of samples and tips was designed and implemented. This permits a continuous operation of the microscope under the experimental conditions of UHV. Thermal instabilities and temperature differences between the tip and the sample were solved with the design of a movable shield to avoid heating by thermal radiation. The introduction of a new high voltage signal generator with variable frequency and the development of a user-friendly LabVIEW interface to communicate with this device notably improved the piezomotors driving. These piezomotors perform the micro-positioning of all the microscope parts and are driven through this interface. Finally, the previous tip-holder design was modified to incorporate a piezo actuator behind the cantilever, which provides the necessary excitation for the implementation of dynamic AFM modes. The installation of a Phase Lock Loop (PLL) circuit to lock the cantilever frequency and the replacement of old feedback electronics for a digital SPM Controller, with advanced options of frequency-shift feedback, was another requirement for the correct implementation of non-contact AFM. The second chapter deals with DNA sample preparation for high resolution imaging by AFM. Based on our studies, the advantages and drawbacks of the most commonly used techniques for DNA adsorption are discussed in detail. Our measurements in contact mode demonstrate the convenience of using hydrophobic substrates for high resolution DNA imaging. At hydrophilic surfaces, like mica, the presence of a thin water layer could be responsible of strong adhesion forces between the cantilever and the sample. In order to overcome this limitation we tested HOPG as hydrophobic substrate. HOPG, chemically modified with amphiphilic compounds, allowed us to deposit DNA without molecular damage or stress. The HOPG surface treatment was significantly improved. New protocols were developed to control the formation of dodecylamine disordered monolayers or lamella structures on the substrate. The lamella formation induces a subsequent self assembly of DNA single molecules. In the last chapter we discuss our results on DNA imaging obtained with the different operation modes implemented in our microscope: contact mode, tapping mode and frequency modulation (non-contact) AFM. We conclude that the last one provides higher signal stability and the necessary sensitivity to observe DNA details at a single-molecule level. We also present a study of frequency shift versus distance dependence (force spectroscopy experiments) performed in DNA samples. We discuss for the first time a plausible explanation to the origin of the atomic force contrast between the substrate and the DNA molecules. Force spectroscopy measurements performed along DNA molecules reveal two distinguishable types of interaction. This result suggests that the chemical composition of the minor-major groove and/or of the sugar-phosphate backbone along the molecule can be detected, opening numerous possibilities for further studies and applications of this technique.

EPFL2008

Scaling properties of DNA knots studied by atomic force microscopy

Erika Ercolini

The main subject of the present thesis is the experimental study of the scaling properties of DNA knots of different complexities by tapping mode atomic force microscopy (AFM) in air. Homo- or heterogeneous mixture of DNA knot types were deposited onto mica in regimes of (i) strong adsorption, which induces a kinetic trapping of the molecules, and of (ii) weak adsorption, which permits relaxation on the surface. The contour of each knotted molecule was analyzed by a box counting algorithm, giving the number of boxes containing a part of the molecule, N(L), as a function of the box size, L, allowing to recover the relation N(L) ≈ L-df, where df is the fractal dimension and ν = 1/df is the scaling exponent. This relationship is complicated by the presence of a persistence length of DNA (about 50 nm) which introduces a crossover from a rigid rod behavior to a self-avoiding walk behavior. In (i) the radius of gyration of the adsorbed DNA knot scales with the 3D Flory exponent ν ≈ 0.58 within error. In (ii), the value ν ≈ 0.66, intermediate between the 3D and 2D (ν = 3/4) exponents, was found, indicating an incomplete 2D relaxation or a different polymer universality class. A different analysis, where the fractal dimension was determined by a customized box counting algorithm giving the knot mass as a function of the box size, yielded compatible results. In the case of weak binding conditions, AFM images show evidence of the localization of knot crossings, which is an effect theoretically predicted for knotted polymers confined in two dimensions (flat knots). Part of this thesis is dedicated to a fascinating application of AFM: the imaging of biomolecules in an aqueous buffer. In particular, images of plasmids adsorbed to mica strong enough to be visualized and loosely enough to see them moving in consecutive scans will be shown. The possibility of imaging under buffer molecules loosely anchored to the substrate opens the way to the investigation of biological processes near physiological conditions. The first step of the study of homologous recombination will be presented. We will also show images concerning our study of the activity of topoisomerase I on supercoiled plasmids. Clusters of DNA molecules and proteins were found when imaging in presence of magnesium, in agreement with recent findings by AFM in air. The research on topoisomerases and their interactions with inhibitors or poisons is a hot topic, being these enzymes targets of anti-cancer drugs. Our study paves the way to the investigation of the activity of topoisomerase II, the enzyme which removes knots from DNA. Finally, the principles of static and dynamic light scattering, and the results of dynamic light scattering on latex beads of known size will be presented. Particular emphasis will be given to the discussion of the contribution of light scattering techniques for future experiments on the study of the static and dynamic properties of DNA knotted molecules in solution. These experiments would contribute to shed light on the possible dependence of the gyration radius of knotted polymers on the knot type, and would allow testing theoretical predictions about their relaxation time.

EPFL2008

Investigation of Biophysical Properties of Biomolecules by Means of Atomic Force Microscopy

Jae Sun Jeong

EPFL2012

Cryo-AFM development for high resolution DNA imaging and spectroscopy

Susana del Carmen Tobenas Borron

EPFL2008

Scaling properties of DNA knots studied by atomic force microscopy

Erika Ercolini

EPFL2008