An analysis of the tensile elongation to failure of laminated metal composites in the presence of strain-rate hardening
Publications associées (42)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Effects of non-uniform strains on tensile fracture of fiber-reinforced ceramic–matrix composites have not been satisfactorily explained by existing mechanics-based models. In this paper, we use an exact model of fiber fragmentation under global load sharin ...
We use the long-wavelength model of Hutchinson and Neale (1977) and Ghosh (1977) to estimate the uniform tensile elongation of two-phase composites deforming quasistatically according to the equistrain rule of mixtures, in which one phase is ductile while ...
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
Cavitation erosion during the incubation period was investigated via pitting tests conducted on three different materials: an Aluminum alloy, a Nickel Aluminum Bronze alloy and a Duplex Stainless Steel. Pitting tests were conducted in a cavitation tunnel i ...
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
Ultra High-Performance Fibre-Reinforced Concrete (UHPFRC) combines high strength, deformation capacity and low permeability. This makes UHPFRC particularly suitable as a strengthening and protective layer for application to existing reinforced concrete str ...
The mechanical behaviour of nanocrystalline austenitic steels with and without yttria particles was investigated using in situ synchrotron diffraction during tensile deformation. Two different strain-hardening regimes were found. The first regime can be as ...
This study contributes to our understanding of the damage evolution and fracture behaviour of two-phase materials that combine brittle particles with a ductile matrix. We focus on model composites roughly half-ceramic/half-metal that are produced in-house ...
We show that steel-magnesium alloy laminated metal composites (LMCs) can be produced by gas pressure infiltration of a liquid magnesium alloy between layers of stacked dimpled steel sheets. Resulting LMCs are amenable to subsequent warm rolling. The LMCs a ...