Proof of concept of a dual-band circularly-polarized RF MEMS beam-switching reflectarray

Caner Güçlü, Julien Perruisseau-Carrier
Institute of Electrical and Electronics Engineers, 2012
Article

Résumé

In this communication we propose the concept of a circularly polarized reflectarray (RA) antenna capable of independent beam-switching in both K and Ka bands. The RA unit cell comprises one microstrip ring per each operation frequency. Each ring is integrated with six equally spaced series RF micro electro-mechanical systems (RF MEMS) switches, which allows implementing the sequential rotation principle formerly used in circularly-polarized RA for single-frequency operation. A detailed design is proposed, considering the best relative arrangement of the rings corresponding to each frequency, the accurate modeling of the RF MEMS switches, and the full-wave simulation of the full array. The designed RA is implemented on a 4-inch quartz wafer and comprises 109 K-band and 124 Ka-band split-rings. Two prototypes representing two frozen states of the reconfigurable antenna are fabricated and measured. The designed RA can +/- 120 degrees provide progressive phase difference in both operation bands exhibiting beam switching to +/- 35 degrees and +/- 24 degrees off the broad-side in K and Ka bands respectively. The performance of the designed antenna is verified by the agreement of the measured and simulated radiation patterns.

Official source

https://infoscience.epfl.ch/record/178318?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Recent developments on reconfigurable band-filtering antennas

Julien Perruisseau-Carrier

This paper presents implementations of very wideband antennas with reconfigurable band-rejection filtering within the band. The base antenna topology used is a dipole slot bow-tie whose maximal dimension at the lowest matched frequency is only 0.2λ0. The antennas can be operated with 3 different rejection frequencies and in an all-pass mode, using Pin diodes. In particular, it is explained that the filtering performance of such antenna should be assessed in terms of overall efficiency rather than return loss only. Then, the impact of the different dissipative loss sources on the results is studied, thereby demonstrating that the actual filtering performance of the antenna weakly depends on the pin diode series resistance, in contrast with the apparent degradation in terms of return loss. Thanks to an integrated DC biasing network, it is also evidenced experimentally that the antenna radiation patterns are stable both in frequency and in the different reconfigurable states that are matched at a considered frequency.

2010

Chargement

Towards compact and frequency-tunable antenna solutions for MIMO transmission with a single RF chain

Julien Perruisseau-Carrier, Mohsen Yousefbeiki

Recently, a technique called beam-space MIMO has been demonstrated as an effective approach for transmitting multiple signals while using a single RF-chain. In this work, we present novel design considerations and a compact antenna solution to stimulate the deployment of beam-space MIMO in future wireless applications. Targeting integration in small wireless devices, the novel antenna is made of a single integrated radiator rather than an array of physically-separated dipoles. It also drastically simplifies the implementation of variable loads and DC bias circuits for BPSK modulated signals, and does not require any external reconfigurable matching circuit. Finally, we show that this antenna system could be reconfigured by dynamic adjustment of terminating loads to preserve its beam-space multiplexing capabilities over a 1:2 tuning range, thereby promoting the convergence of MIMO and dynamic spectrum allocation via reduced-complexity hardware. A prototype achieving single-RF-chain multiplexing at a fixed frequency is designed and measured, showing excellent agreement between simulations and measurements.

Institute of Electrical and Electronics Engineers2014

Chargement

The Substrate Integrated Waveguide (SIW) technology is a very promising candidate to provide widespread commercial solutions for modern communications systems. Its main advantage is the possibility to integrate passive/active components and antennas in the same substrate by using standard manufacturing processes, such as the Printed Circuits Board (PCB) processing technique. Nevertheless, the production of low-cost SIW devices is inherently linked to commercially available substrates and fabrication methods. In particular, these constraints usually limit (a) the frequency range of operation of certain SIW antennas and (b) the possibility of creating multimode structures dealing with orthogonal polarizations. The motivation of this PhD thesis is to overcome these two limitations by proposing innovative SIW components based on PCBs in order to favour the compatibility with existing systems and to lower their cost. Hence, the usage of the SIW technology would be extended towards new applications and scenarios. One type of antenna strongly affected by the limitation (a) is the H-plane SIW horn antenna. While standard horns are employed in many applications and in a wide range of frequencies, their counterparts in SIW technology are restricted to the Ka-band and above. At lower frequencies, commercial substrates are electrically thin and the performances of these end-fire antennas severely diminish. To solve this problem, a novel low-profile SIW horn antenna has been designed to be used at the Ku-band and below, while offering wideband characteristics. In addition, the horn shape has been further optimized to reduce the antenna footprint for a given directivity. In order to overcome the limitation (b), a substrate integrated guide able to simultaneously carry orthogonally polarized modes has been developed: the so called Extended Substrate Integrated Waveguide (ESIW). An ESIW dual-polarized system composed of an Orthomode Transducer (OMT) feeding a dual-polarized horn antenna has been designed and experimentally verified. The overall combination of concepts and ideas proposed in this thesis opens the door towards new SIW components that can increase the capacity, robustness and compactness ofmodern communication systems.

EPFL2014

Chargement

EPFL2014