Optical injection locking of polarization modes and spatial modes in single-aperture VCSELs and VCSEL arrays emitting at 1.3 mu m
Publications associées (59)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The III-nitride semiconductor material system - (InAlGa)N - is of highest interest for optoelectronic applications due to its direct bandgap, tunable from the ultraviolet to the infrared spectral range. The most well-known are white light-emitting diodes, ...
Lateral loss causes optical energy to leave the laser cavity in the transverse, lateral, direction, and is sometimes neglected to simplify the numerical simulations. However, in contrast to outcoupling and absorption losses, we show that the lateral loss c ...
This paper reports on a numerical analysis of methods for current injection into AlInGaAs/InP tunnel-junction electrically pumped vertical-external-cavity surface-emitting lasers. The tunnel junction is patterned to minimize the current crowding effect and ...
We present an integrated beam steering system with a microlens scanner and a vertical cavity surface-emitting laser (VCSEL) source. The scanner and the VCSEL are assembled with an alignment sphere process and with an accuracy of 121 ±7 μm defined by precis ...
We present the static and optical injection response of wafer-fused long-wavelength VCSELs with and without intracavity patterning. It is found that the extra optical cavity patterning increases the gain anisotropy between orthogonal polarization modes, in ...
In this work, the authors describe a novel route to achieve a high reflectivity, wide bandwidth feedback mirror for GaN-based vertical-cavity light emitters; using air-suspended high contrast gratings in TiO2, with SiO2 as a sacrificial layer. The TiO2 fil ...
A V S Amer Inst Physics2015
, , , , ,
We report for the first time on the performance of 1300 nm waveband semiconductor disc lasers (SDLs) with wafer fused gain mirrors that implement intracavity diamond and flip-chip heat dissipation schemes based on the same gain material. With a new type of ...
Optical Society of America2014
, , , , , , ,
Optical injection locking of 1.3-mu m phase-locked VCSEL arrays defined by patterned tunnel junctions and wafer fusion is investigated experimentally and theoretically. The impact of the overlap between the master laser injection beam and the injected mode ...
Optical Society of America2014
In this thesis, we studied the modal structure and the polarization of the optical field emitted by vertical-cavity surface-emitting lasers (VCSELs) emitting in the short- and long-wavelength domains (0.9-1.3μm). Our study concerns two types of components: ...
EPFL2013
, , , , ,
Recent progress in the fabrication and performance of 1.3-mu m 10-Gb/s, low power consumption wafer-fused VCSELs grown by MOVPE under nitrogen atmosphere are presented and discussed. By optimization of the growth conditions and implementation of a cavity a ...