Distributed temperature sensor system based on Raman scattering using correlation-codes
Publications associées (34)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This study investigates the composition of free surfaces of neodymium-doped yttrium–aluminum–garnet, using energy minimization techniques. Atomistic modeling shows that the dopant is concentrated in a zone within 0.5 nm ̊of the surface, the enrichment fact ...
A new procedure for laser spot welding of thin copper stripes was developed based on measuring the calibrated reflectivity coaxially to the laser beam and using this signal for in situ control of the laser power. Experiments with a power ramp of r=3.1 MW/s ...
We present photonic crystal structures that exhibit small group velocity of light, which can be used as compact optical delay component. We experimentally measure the group velocity reduction to be less than 0.008c. By breaking the rotation symmetry of the ...
In this paper we present briefly two possible approaches for modelling the laser cladding process. The first approach is 2D and consists in finding the shape of the molten pool given the fraction of the laser power which is available at the surface of the ...
Epitaxial Laser Metal Forming (E-LMF) consists in impinging a jet of metallic powder onto a molten pool formed by controlled laser heating and thereby, generating epitaxially a single crystal deposit onto a single crystal substrate. It is a near net-shape ...
The present work is part of a feasibility study to investigate the excimer laser photon-assisted thermal decompn. of anthracene at 248 nm. The principle is to combine UV photons of an appropriate light source and heat in an incinerating reactor at modest t ...
Because of the strong electron-phonon coupling of the emitting 3d orbital in transition-metal (TM) ions, 3d systems exhibit luminescence with typically several hundred nm of spectral bandwidth. TM-ion-doped materials are, therefore, of high interest for ap ...
Characteristics of one-cascade (1.06 double right arrow 1.24 mum) and two-cascade (1.06 double right arrow 1.24 double right arrow 1.48 mum) phosphorus-doped fiber Raman lasers are studied. The cavities of both lasers are formed by Bragg gratings written d ...
A model which takes into account the main phenomena occurring during the laser-cladding process is proposed. For a given laser power, beam radius, powder jet geometry, and clad height, this model evaluates two other processing parameters, namely, the laser ...
Laser-induced CVD has been used to produce Pt lines on pyrex glass substrates by means of platinum bis(hexafluoroacetylacetonate) as precursor. The effect that writing speed has on the line geometry and resistivity was studied, as well as the influence of ...