Influence of quench rate and microstructure on bendability of AA6016 aluminum alloys
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
Mechanisms responsible for the embrittlement of leaded "free-machining" copper alloys at intermediate temperatures (i.e. around 400 °C) are examined using a combination of microstructural and mechanical characterization. Tensile tests are conducted on pure ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
In this work we have studied brittle fracture in high-chromium reduced activation tempered martensitic steels foreseen as structural materials for thermonuclear fusion reactors. Developing the adequate materials that can withstand the severe irradiation co ...
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
In this technical note we compare silica gel grains and quartz sand as sediment media for vegetation root growth in laboratory experiments for ecohydrology and ecohydraulics. Silica gel grains become quite transparent when saturated with water. This would ...
We report on a comparative measurement of intergranular bismuth coverage on a copper substrate using Auger electron spectroscopy (AES), x-ray photoelectron spectroscopy (XPS) and Rutherford backscattering spectroscopy (RBS). Bicrystalline copper samples we ...
By following the densification kinetics of nanocrystalline γ alumina and corresponding microstructural evolution we showed that the diffusive transformation gamma-alpha involves several processes such as nucleation of alpha phase, rearrangement of gamma cr ...
Twinned dendrite growth has been found to occur in aluminum alloys when critical thermal conditions (G approximate to 100 K/cm, nu(s) approximate to 1 mm/s) and a slight convection in the melt are present during directional solidification. Split in their t ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
