Two-phase frictional pressure drops in U-bends and contiguous straight tubes for different refrigerants, orientations, tube, and bend diameters: Part 1. Experimental results (RP-1444)
Publications associées (38)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Intube evaporation tests for R-407C and R-407C/oil are reported for a plain copper tube. The tests were run at a nominal inlet pressure of 6.45 bar (93.5 psia) at mass velocities of 100, 200 and 300 kg/m2s (73581, 147162 and 220743 lb/h ft2) over nearly th ...
The substitution of CFC refrigerants in refrigeration systems, heat pumps and organic Rankine cycles for heat recovery, requires good methods for predicting heat transfer of substitute fluids. The measurements in the LENI test facility (concentric tubes wi ...
A summary of the objectives and conclusions reached in this project are: •A litterature search on post dryout heat transfer for pure refrigerants and for refrigerant-oil mixtures was performed and a comprehensive review written (Chapters 9, 10, and 11); •T ...
The conversion to the new alternative refrigerants caused by the greenhouse and ozone effects is now replacing nuclear reactor analysis and safety as the major driving force in two-phase heat transfer research. Extensive studies are underway on pool boilin ...
The industrial conversion to new alternative refrigerants is now one of the major driving forces in two-phase flow and boiling heat transfer research. A state-of- the-art review is presented here to quantify what has been done so far, assess the strengths ...
Flow pattern data for horizontal intube flow boiling are presented for refrigerants R-134a and R-402 (60/2/38). The flow pattern observations were compared with various criteria for determining whether the entire circumference of a horizontal evaporator tu ...
The substitution of old refrigerants in refrigeration systems, heat pumps and organic Rankine cycles for heat recovery, request a good knowledge of heat transfer properties of substitute fluids. The test measurmements in LENI test facility (concentric tube ...
The aim of this work is to extend the investigation, to the influence of lubricating oil on R22-oil mixture in the heat pump and refrigeration system. The refrigerant-oil test bed was modified to accommodate R22-oil mixture investigation and R22-oil solubi ...