Autogenous Shrinkage and Hydration Kinetics of SH-UHPFRC under Moderate to Low Temperature Curing Conditions
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper presents an investigation on the behaviour and strength of slab-column joints in multystorey buildings. Such joints may develop different potential failure modes such as crushing of the concrete of the slab (due to column loading), bending or pu ...
In this project we target a desired viscoelastic properties of PDMS for the application of thin wall membrane uses as a container to support soft test sample biomaterials during mechanical compression tests. The biocompatible PDMS membrane is produced by a ...
The periodontal ligament (PDL) is a highly vascularized soft connective tissue. Previous studies suggest that the viscous component of the mechanical response may be explained by the deformation-induced collapse and expansion of internal voids (i.e. chiefl ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
Compression experiments were conducted on slender glass fiber-reinforced polymer (GFRP) laminates at different temperatures in the elevated range. Experimental buckling loads, lateral second-order deformations, and shear strength decreased with increasing ...
We perform two-dimensional dynamic fracture simulations of a specimen in biaxial tension, incorporating various distributions of pre-existing microcracks. The simulations consider the spatial distribution of flaws while modeling the discrete failure proces ...
The production of Portland cement accounts for 5 to 8% of the global anthropogenic CO2 emissions. In the past years, the cement industry has attempted to reduce this contribution by the use of mineral additions on the cement or in the concrete mix. The typ ...
A waterborne latex-based technique, in which functionalized laponite is attached to PS and acrylic latex particles, is used to prepare films containing up to 50 wt% laponite. At high laponite contents this leads to a cellular arrangement of the laponite-ri ...
The use of the structural adhesive bonding technique is well established in the aircraft and automotive industries where, in most cases, joints can be fabricated indoors under controlled conditions. In the civil engineering domain, however, load-bearing st ...
The extremely low permeability of Ultra High Performance Fibre Reinforced Concretes (UHPFRC) associated to their outstanding mechanical properties make them especially suitable to locally "harden" reinforced concrete structures in critical zones subjected ...
