A meso-scale computational approach to dynamic failure in concrete
Publications associées (262)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In the scope of this study, the capability of particle image velocimetry (PIV) method to monitor cracking behavior of cement-based materials was investigated. Load-crack opening width curves for beam specimens were obtained both from conventional measureme ...
The partitioning of the total strain energy release rate, G(tot), into the Mode I, G(I), and Mode II, G(II), components is challenging, especially in asymmetric cracks. Although many researchers have studied the fracture behavior of composite materials und ...
The results obtained from many previous studies highlight the need for further investigation of the strong connection existing between fresh state and hardened state performance of fiber reinforced concrete. A comprehensive experimental study was conducted ...
Deformation-dependent punching shear resistance often constitutes the decisive design criterion for reinforced concrete slabs supported by columns. The increasing number of aging structures exhibiting insufficient punching resistance and detailing deficien ...
This article presents results from the experimental testing of two half-scale RC U-shaped walls under quasi-static cyclic bi-directional loading along the diagonal direction of the U-shaped section, which were recently completed at EPFL. The main objective ...
This paper investigates the uniaxial compression behaviour of concrete under different strain rates and its relation to sustained loading. The aim is to observe the strain rate effect on the pre- and post-peak behaviour of concrete. In particular, the deve ...
10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures2015
We demonstrate the selective area growth of GaN-(Al,Ga)N core shell nanowire heterostructures directly on Si(111). Photoluminescence spectroscopy on as-grown nanowires reveals a strong blueshift of the GaN band gap from 3.40 to 3.64 eV at room temperature. ...
Silicon nitride is a widely used industrial ceramic, specifically for dynamic loading applications because of its special mechanical and material properties. The investigation of the underlying mechanisms which lead to these properties is experimentally ch ...
The seismic reinforcement of masonry walls needs to be carried out through appropriate and effective techniques aiming at providing both adequate strength and displacement capacity. The present research concerns experimental results about the in-plane beha ...
Amorphous solids tend to present an abundance of soft elastic modes, which diminish their transport properties, generate heterogeneities in their elastic response, and affect non-linear processes like thermal activation of plasticity. This is especially tr ...