Publication

Assessment of Shear Strength for Existing Bridges with Low Amounts of Shear Reinforcement

Publications associées (60)

Influence of flanges on the shear-carrying capacity of reinforced concrete beams without web reinforcement

Miguel Fernández Ruiz, Carlos Rodrigo Ribas Gonzalez

T-beams are acknowledged as economic and efficient structural members widely used for floor slab construction systems. In many cases, according to practice in some countries, the beams do not present transverse reinforcement, and their shear strength is go ...

Structural concrete2017

Experimental validation of a railway bridge made of a reinforced UHPFRC-T-beam

The material UHPFRC is not yet used in the field of bridge construction regularly. The reasons are missing codes and allurements for innovation in the structural engineering. Nevertheless, UHPFRC has many advantages, which are significant compared to the u ...

Wiley-Blackwell2017

The Interplay of In Situ Stress Ratio and Transverse Isotropy in the Rock Mass on Prestressed Concrete-Lined Pressure Tunnels

Anton Schleiss

This paper presents the mechanical and hydraulic behaviour of passively prestressed concrete-lined pressure tunnels embedded in elastic transversely isotropic rocks subjected to non-uniform in situ stresses. Two cases are distinguished based on whether the ...

Springer Wien2016

Static and Fatigue Shear Strength of Reinforced Concrete Slabs Under Concentrated Loads Near Linear Supports

Francisco Manuel Maciel Natário

Reinforced concrete slabs without shear reinforcement under concentrated loads near linear supports are typical cases of bridge deck slabs, transfer slabs or pile caps. Such members are often designed or assessed in shear/punching shear with code provision ...

EPFL2015

Influence of Fatigue Loading in Shear Failures of Reinforced Concrete Members without Transverse Reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz, Francisco Manuel Maciel Natário, Juan Manuel Gallego Martín

Shear fatigue of reinforced concrete members without transverse reinforcement has been observed to be potentially governing for the strength of some structural members subjected to large live loads of repetitive nature (as traffic, wind or wave actions). A ...

Journal of Advanced Concrete Technology2015

Structural Behavior of R-UHPFRC - RC Composite Slabs

Maléna Bastien Masse

The application on existing Reinforced Concrete (RC) slabs of cast-on-site Ultra-High Performance Fiber Reinforced cement-based Composite (UHPFRC) layers is an efficient reinforcement technique, currently spreading. The thin layer of UHPFRC, with or withou ...

EPFL2015

Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects

Aurelio Muttoni, Miguel Fernández Ruiz, Juan Sagaseta Albajar

Many theories and empirical formulae have been proposed to estimate the shear strength of reinforced concrete members without transverse reinforcement. It can be noted that these approaches differ not only in the resulting design expressions, but also on t ...

2015

Structural performance of complex core systems for FRP-balsa composite sandwich bridge decks

Michael Osei-Antwi

Based on current fiber-reinforced polymer (FRP) composite construction principles, FRP decks fall into two categories: pultruded decks and sandwich decks. Sandwich decks comprise face sheets and either honeycombs or foams reinforced with internal FRP webs ...

EPFL2014

Shear Strength of Arch-Shaped Members without Transverse Reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz, Stefano Campana

Arch-shaped members are used in many reinforced concrete structures such as tunnels, bridges, silos, or offshore constructions. They are generally designed to carry significant axial forces, and, in most cases, are not provided with transverse reinforcemen ...

ACI Structural Journal2014

Stress Fields for the analysis of the faillure load and cracking state of dapped-end beams (Aplicación de modelos de campos de tensiones para el análisis en servicio y rotura de apoyos a media madera)

Aurelio Muttoni, Miguel Fernández Ruiz, Jaime Mata Falcon

The automatic generation of elastic-plastic stress fields (EPSF) for structural concrete members by means of the finite element method has been demonstrated as a suitable approach for the design and assessment of D regions. This methodology allows accounti ...

VI Congreso ACHE2014

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search