Dynamic Modeling and Simulation of Two-phase Evaporators and Condensers in the context of a CO2 Based District Energy Network
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Xu et al. have recently published a set of results for boiling heat transfer measurements in a multi- channel micro- scale evaporator for flow boiling of acetone in triangular cross- section channels ( hydraulic diameter of 155.4 mm). In the present collab ...
A new falling film heat transfer test facility has been built for the measurement of local heat transfer coefficients on a vertical array of horizontal tubes, including flow visualization capabilities, for use with refrigerants. Presently, the facility has ...
Experimental pressure drop results on boiling water flow through three helical coils of tube inner diameter of 4.03 mm and 4.98 mm and coil diameter to tube diameter ratio of 26.1, 64.1 and 93.3 are presented. Both subcooled and saturated flow boiling are ...
Temperature highly affects pavement performance. High and low temperatures not only affects the viscosity of asphalt concrete but also has an impact on the moisture flow within pavements. At temperatures below 0°C the freezing of pavements dramatically cha ...
Remarkably different behaviors are found when comparing micro-scale flow boiling heat transfer data by distinct authors, even under similar experimental conditions. Such differences are almost certainly related to the complexity of confined forced-flow boi ...
Evaporative drying of porous media is jointly controlled by external ( atmospheric) conditions and by media internal transport properties. Effects of different atmospheric potential evaporative demand on observed drying rates were studied in a series of la ...
District energy systems have the potential to decrease the CO2 emissions linked to energy services (heating, hot water, cooling and electricity), thanks to the implementation of large polygeneration energy conversion technologies, connected to a group of b ...
The reliable prediction of pressure drop in two-phase flow is an important prerequisite to accurate optimization of thermal systems. Because of the complexity of these types of flow, empirical or semiempirical relationships are only of limited reliability ...
This paper describes a new method to determine the equivalent heat transfer coefficients, i.e., radial and azimuthal, in CICC's with parallel cooling channels. The method is based on the measurement of the steady state temperature response to a step heatin ...
Body mass and composition reflect the combined effects of three processes: energy intake, energy partitioning (storage), and energy expenditure. Energy is released from food as it is combusted to carbon dioxide and water, and is expended as heat and work w ...
