NMR investigation of the low-temperature dynamics of solid He-4 doped with He-3 impurities

American Physical Society, 2013
Article

Résumé

The lattice dynamics of solid He-4 has been explored using pulsed NMR methods to study the motion of He-3 impurities in the temperature range (0.05-0.20 K) where experiments have revealed anomalies attributed to superflow or unexpected viscoelastic properties of the solid He-4 lattice. We report the results of measurements of the nuclear spin-lattice and spin-spin relaxation times that measure the fluctuation spectrum at high and low frequencies, respectively, of the He-3 motion that results from quantum tunneling in the He-4 matrix. The measurements were made for He-3 concentrations 16 < x(3) < 2000 ppm. For He-3 concentrations x(3) = 16 and 24 ppm, large changes are observed for both the spin-lattice relaxation time T-1 and the spin-spin relaxation time T-2 at temperatures close to those for which the anomalies are observed in measurements of torsional oscillator responses and the shear modulus. These changes in the NMR relaxation rates were not observed for higher He-3 concentrations.

Official source

https://infoscience.epfl.ch/record/188965?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Electronic and magnetic properties of quasi-one dimensional ormore widely low-dimensional systems aswell as their related correlated electron phenomena have been at the very frontier of condensed matter physics for quite some time. The reduced dimensionality in these systems offers a unique possibility of direct comparison with model calculations. Furthermore the competing ordered ground states in strongly correlated low-dimensional systems lead to rich phase diagrams comprising many electronic phases, such as superconductivity, charge/spin densitywaves, different electric charge distributions, or a novel formof metalicity. These phases are generically sensitive to a variety of parameters, such as temperature, magnetic field, pressure, a certain degree of irregularity, etc. In this thesis, we employ Electron Spin Resonance (ESR) spectroscopy using strong magnetic fields, high microwave frequencies and high hydrostatic pressure to study a recently discovered family of quasi-one-dimensional organic charge transfer salts, the δ-(EDT-TTF-CONMe2)2X; family to gain insight into the complex physics of strongly correlated low-dimensional compounds. ESR is a highly efficient technique to study organic conductors. This can be easily understood if one realizes that ESR is observable inmost organic conductorswhile only very few "ordinary" metals show detectable ESR signals, even at low temperatures. Indeed, this feature results principally from the electronic low-dimensionality of these systems which controls the spin relaxation process. This tendency is even more reinforced by the fact that most organic molecules only contain light chemical elements for which the effect of the spin-orbit coupling on the ESR linewidth remains small. For this reason, ESR spectroscopy is certainly amajor tool to investigate the paramagnetic state of organic conductors. Moreover, in samples where a magnetic order is present, the large frequency bandwidth of the spectrometers used in the experimental setup (4 GHz–420 GHz) makes the resonance signal accessible at low temperatures in the ordered state, where the resonance frequencywould be too high for conventional ESRspectrometers. Our device hence represents an efficient tool to probe different magnetic ground states and, in particular, the antiferromagnetic state, which is most commonly found in organic salts. Organic conductors exhibit a high degree of sensitivity with respect to magnetic fields and applied pressure. To combine the high sensitivity of the ESR method with the sensitivity and thus fine tuneability of these organic systems by magnetic field and pressure, we build a unique high-field, high-frequency and high-pressure ESR spectrometerwhich is well suited to the study of organic materials. Compared to other devices of its kind, the ESR spectrometer built in our laboratory as a part of this thesis enables a wide parameter space to be explored: magnetic fields from 0 – 16 T, microwave frequencies in the 105 – 420 GHz range and by making use of a custom-made pressure cell, the sample applied pressure can be elevated up to 1.6GPa. To the best of our knowledge, the addition of such a pressure regulating unit to an ESR is unique. Through varying the applied pressure, it can be used to investigate the competition of different ground states: bymodifying the lattice parameters, it can tune the interactions without introducing disorder. The first Part of the thesis is dedicated to a general overview about the physical properties of quasi-one-dimensional organic systems. It also contains a more specific introduction to the crystallographic and electronic properties of the δ-(EDT-TTF-CONMe2)2X family of charge transfer salts. In Part II, we focus on the theoretical description of electronic correlations with a special emphasis on lowdimensional electron systems and on the effect of dimensionality. The objective of this part is to assemble the necessary theoretical notions to understand the phenomena observed in the system under investigation. We show that Coulomb-repulsion in general leads to antiferromagnetism, and give a brief phenomenological description of the antiferromagnetically ordered state. Then, a standard description of the physicalprinciples of Electron Spin Resonance follows. We also give a briefdescription of antiferromagnetic resonance (AFMR) and Conduction Electron Spin Resonance (CESR) with a special focus on quasi-one-dimensional situations. Part III presents the technical details of the ESR spectrometer developed as a part of this thesis. The final Part describes the experimental observations collected during the thesis. In Chapter 9, the phase transitions at atmospheric pressure of a sample of δ-(EDT-TTF-CONMe2)2AsF6 as a function of temperature are presented and discussed. We found a spin-chain behavior at high temperatures and a complicated antiferromagnetic structure below TN=8 K. In the intermediate temperature range we found a suppression of the susceptibility what we explained by the opening of a spin-pseudogap. In Chapter 10, the same procedure is performed for a δ-(EDT-TTF-CONMe2)2Br sample and the findings are really similar to the case of the AsF6 salt. Finally, in Chapter 11, we describe and evaluate measurements performed under high hydrostatic pressure on the δ-(EDT-TTF-CONMe2)2Br sample. We followed the deconfinement transition of the salt and then identified a dimensional crossover from a quasi-one dimensional metal to a more conventional higher dimensional conducting state. At the end of the thesis we drown a general pressure temperature phase diagram of this family of charge transfer salts.

EPFL2008

Chargement

High Temperature Behavior of Nano-Structured Ceramic Composites Studied by Mechanical Spectroscopy

Mehdi Mazaheri

Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High temperature mechanical spectroscopy measurements were performed in each material between room temperature and 1600 K. In each of these materials, anelastic and viscoplastic relaxation phenomena were investigated and responsible mechanisms were explained. In particular, grain boundary (GB) sliding, which is responsible for high temperature plasticity in fine grained ceramics, gives rise to a peak or an exponential increase in the high temperature mechanical loss. Peak and exponential background depend on two forces, which control the GB sliding: a friction force due to the GB viscosity and a restoring force due to the elasticity of the surrounding grains. In the present thesis, ceramics and composites have been processed, which allow one to study the role played by these forces on the thermo‐ mechanical behavior of these refractory materials. SiAlON ceramics were chosen for studying the viscous force due to the inter‐granular glassy phase. In zirconia and alumina, it is shown how the CNT reinforcements may improve the restoring force and consequently the creep resistance. Different grades of SiAlON ceramics, processed with different sintering aids (Ca2+, Y3+, Yb3+), with oxygen rich (CaO, Y2O3 and Yb2O3) and nitrogen rich (CaH2, YN and YbN) compounds, have been studied. Mechanical spectroscopy has been used to analyze the behavior of the residual glassy phase, present after sintering, either as grain‐boundary glassy (GB) films or glass pockets located in GB triple junctions. The mechanical loss spectra show a relaxation peak, which is due to a relaxation phenomenon (the so called “α‐relaxation”) associated with the glass transition in the amorphous phase. The peak position depends on the glass viscosity and the peak height is mainly affected by the glassy phase amount and the SiAlON bimodal microstructure, namely equiaxed versus elongated grains. Moreover the peak height depends on the restoring force provided by the neighboring grains, which limit the GB sliding process. As a matter of fact, a good correlation between the mechanical loss peak and plastic deformation in a compression test has been observed. It is concluded that the elongated grains in the bimodal microstructure provide a higher restoring force, which limits the GB sliding of smaller equiaxed grains. In the case of equiaxed fine grained oxide ceramics, such as zirconia and alumina, the restoring force has been increased by CNT additions, which can reinforce the GBs. 3Y‐TZPcomposites with a homogenous distributions of CNTs, ranging within 0.5 – 5 wt%, were processed by SPS. A significant improvement in room temperature fracture toughness and shear modulus as well as creep performance at high temperature were obtained, and interpreted as due to the GB reinforcing role of the CNTs. To support this interpretation, high‐resolution electron microscopy and Raman spectroscopy have been carried out. Moreover, a remarkable enhancement of the electrical conductivity up to ten orders of magnitude due to CNT additions has been obtained with respect to the pure ceramics. The isothermal spectrum of the 3Y‐TZP composites (measured at 1600 K) is composed of a mechanical loss peak at a frequency of about 0.1 Hz, which is superimposed on an exponential increase at lower frequency. This is interpreted as primarily due to GB sliding. The absence of a well‐marked peak in monolithic 3Y‐ TZP is justified by considering that the restoring force decreases at low frequencies or high temperatures. Therefore, GB sliding is no more restricted and the mechanical loss increases exponentially, which is correlated to macroscopic creep. With CNT additions the mechanical loss decreases and the relaxation peak is better resolved with respect to the background. This is interpreted by the pinning effect of CNTs on GBs, providing addition source of restoring force, which can hinder GB sliding at high temperature, resulting in a creep resistance improvement. Similarly to 3Y‐TZP based composites, alumina specimens (3 different types of alumina powders) reinforced with different amount of CNTs were sintered by SPS. It is shown how the initial particle size of the powders may affect the dispersion of CNTs. Measurement of different properties, such as hardness, fracture toughness and mechanical loss at high temperature, have evidenced the crucial role of the CNT dispersion in the obtained mechanical properties.

EPFL2013

Chargement

Lattice Relaxation in Solid He-4: Effect on Dynamics of He-3 Impurities

We present a new simplified derivation of the effect of lattice relaxation that accompanies the quantum tunneling of He-3 impurities in solid He-4 on the nuclear spin-lattice relaxation of the He-3 impurities for very low impurity concentrations. As a result of the larger zero point motion of the He-3 impurity compared to the He-4 atoms, a significant lattice distortion accompanies the impurity as it moves through the lattice and the dynamics of the impurity depends on both the interaction energy between two He-3 atoms and on the relaxation of the lattice for the tunneling impurity. Using a phenomenological model for the lattice relaxation we compare the nuclear spin-lattice relaxation rates observed at low temperatures with the dependence on temperature expected for a He-4 lattice relaxation comparable to that observed by Beamish et al. (Phys. Rev. Lett. 96:195304, 2006).

Springer/Plenum Publishers2014

Chargement

High Temperature Behavior of Nano-Structured Ceramic Composites Studied by Mechanical Spectroscopy

Mehdi Mazaheri

EPFL2013

EPFL2008