Effect of Load Distribution and Variable Depth on Shear Resistance of Slender Beams without Stirrups
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Extended shear tab connections have been widely used to connect simply supported beams to the flange or web of supporting columns, as well as the web of steel girders. The American Institute of Steel Construction (AISC) introduced the use of extended shear ...
Arch-shaped members are used in many reinforced concrete structures such as tunnels, bridges, silos, or offshore constructions. They are generally designed to carry significant axial forces, and, in most cases, are not provided with transverse reinforcemen ...
Based on current fiber-reinforced polymer (FRP) composite construction principles, FRP decks fall into two categories: pultruded decks and sandwich decks. Sandwich decks comprise face sheets and either honeycombs or foams reinforced with internal FRP webs ...
Lateral torsional buckling (LTB), a complex phenomenon of instability, occurs when a beam is solicited by a bending force. In the area of steel and composite bridges girders which are characterised by slender plate girders, few experimental and theoretical ...
ECCS European Convention for Constructional Steelwork2014
In codes the drift capacity of unreinforced masonry (URM) walls is often estimated as a function of the failure mode and the aspect ratio. The empirical relationships are based on results from quasi-static cyclic tests on single URM walls, which were teste ...
When compared to tests on reinforced concrete (RC) walls with a rectangular or barbelled cross-section, only very few tests on RC walls with open cross-section exist. Most of these walls were subjected to unidirectional or bidirectional loading along one o ...
This paper presents a semi-analytical methodology for the fracture mechanics assessment of asymmetric adhesively bonded composite joints. The method is based on the classical lamination theory, the simple beam theory and the extended global method. Experim ...
Steel and steel-concrete composite bridges made of plate girders represent an economical structural form and are largely used for short and medium spans. Two parallel plate girders connected by cross-beams define a twin-girder bridge. This type of bridge t ...
We present results from a numerical investigation of the coiling patterns obtained when a slender elastic rod is deployed onto a moving substrate. The Discrete Elastic Rods method is employed to explore the parameter space, construct phase diagrams, identi ...
Separation at the web-flange junction is a common failure mode of pultruded glass fiber-reinforced (GFRP) beams subjected to bending. The causes of this separation appear to depend on the presence of lateral supports to prevent lateral buckling. To clarify ...