Solid oxide fuel cell anode degradation by the effect of hydrogen chloride in stack and single cell environments

Publications associées (30)

À propos
Confidentialité
Mentions légales

Graph Chatbot

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Kinetic and mechanistic understanding of chlorite oxidation during chlorination: Optimization of ClO2 pre-oxidation for disinfection byproduct control

Urs von Gunten, Yun Ho Lee

Chlorine dioxide (ClO2) applications to drinking water are limited by the formation of chlorite (ClO2-) which is regulated in many countries. However, when ClO2 is used as a pre-oxidant, ClO2- can be oxidized by chlorine during subsequent disinfection. In ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Elucidating the Rate-Limiting Processes in High-Temperature Sodium-Metal Chloride Batteries

Corsin Battaglia, Patrik Schmutz, Daniel Alexander Landmann

Sodium-metal chloride batteries are considered a sustainable and safe alternative to lithium-ion batteries for large-scale stationary electricity storage, but exhibit disadvantages in rate capability. Several studies identify metal-ion migration through th ...

WILEY2022

Water Orientation at the Anatase TiO2 Nanoparticle Interface: A Probe of Surface pKa Values

Arianna Marchioro, Marie Bischoff

The acid-base properties of surfaces significantly influence catalytic and (photo)electrochemical processes. Estimation of acid dissociation constants (pKa values) for colloids is commonly performed through electroanalytical techniques or spectroscopic met ...

AMER CHEMICAL SOC2022

Activation of stainless steel 316L anode for anion exchange membrane water electrolysis

Jan Van Herle, Suhas Nuggehalli Sampathkumar, Peter Hugh Middleton, Thomas Benjamin Ferriday

The increased emphasis on renewable energy has resulted in a surge of R&D efforts into hydrogen and battery research. The intensive electrochemical environment surrounding the anodic oxygen evolution reaction (OER) has plagued both the activity and stabili ...

Elsevier2022

Design guidelines for next-generation sodium-nickel-chloride batteries

Daniel Alexander Landmann

Sodium-nickel-chloride batteries have a proven track record for backup power applications, but also show great potential for large-scale stationary electricity storage currently dominated by lithium-ion batteries. While lithium-ion cells rely on critical c ...

EPFL2022

Synthetic chemistry with nitrous oxide and triazenes

Iris Roswitha Landman

Nitrous oxide (N2O) has gained much interest because of its physiological effects ("laughing gas") and its negative environmental impact ("greenhouse gas", "ozone-depleting substance"): It has a lifetime of more than 100 years in the atmosphere. Its persis ...

EPFL2022

Highly Efficient Activation of HCl Dissociation on Au(111) via Rotational Preexcitation

Rainer Beck

The probability for dissociation of molecules on metal surfaces, which often controls the rate of industrially important catalytic processes, can depend strongly on how energy is partitioned in the incident molecule. There are many example systems where th ...

2021

Reactions of alpha,beta-Unsaturated Carbonyls with Free Chlorine, Free Bromine, and Combined Chlorine

Urs von Gunten

Chemical disinfectants employed in water and wastewater treatment can produce a variety of transformation products, including carbonyl compounds (e.g., saturated and unsaturated aldehydes and ketones). Experiments conducted under conditions relevant to chl ...

AMER CHEMICAL SOC2021

Energy Analysis of a Cardiac Assist Device based on Dielectric Elastomer Actuator through an Equivalent Electrical Circuit

Yves Perriard, Yoan René Cyrille Civet, Francesco Clavica, Jonathan André Jean-Marie Chavanne

Lumped parameter model and mock circulation loop are two tools commonly used in biomedical research to simulate cardiac system in order to study different assist devices. In this paper, a lumped parameter model is proposed to simulate a circulation loop. T ...