Microstructure examination of Fe-14Cr ODS ferritic steels produced through different processing routes
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The rheological behavior of a solidifying alloy is modeled by considering the deforming material as a viscoplastic porous medium saturated with liquid. Since the solid grains in the mush do not form a fully cohesive skeleton, an internal variable that repr ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...
Two batches of subsize V-notched impact bend specimens and subsize tensile specimens have been irradiated in the Saphir test reactor of the Paul Scherrer Institute (PSI). The first batch of specimen has been irradiated at 250 degrees C to a dose of 2.65 x ...
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
Force and pressure sensors based on the piezoresistive properties of thick- film resistors have recently found wide application due to their low cost, reliability, and relatively good precision. Achieving high elastic mechanical strains is important to max ...
Recently, high-strength zirconia-toughened alumina (ZTA) ceramic substrates have attracted interest, because they offer much improved mechanical properties over straight alumina, while maintaining advantages such as good thermal conductivity and chemical s ...
We have fabricated and tested infrared scanning near-field optical microscope (IR-SNOM) probe tips made from singlemode chalcogenide fiber. The process used to create the tips was similar to conventional micropipette-puller techniques, with some modificati ...
Tensile properties and microstructure of Danocrystalline electrodeposited Ni at temperatures between room temperature and 330° C are presented. Above 300° C low flow stress and high tensile elongation are observed along with grain growth and segreg ...
A new numerical model is proposed for simulating the mechanical behavior of unidirectional composites which is based on a three-dimensional (3D) shear-lag model. The 3D shear-lag model considers the micro-damage phenomena of interfacial debonding and inter ...
The ball punch test technique was used to evaluate the conventional tensile and impact properties of the tempered martensitic steel EUROFER97 from room temperature down to liquid nitrogen temperature. The testing was carried out on unirradiated material on ...
