FIBER PULL-OUT AND STRAIN LOCALIZATION IN CERAMIC MATRIX COMPOSITES
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
The potential of pulp fiberreinforced thermoplastics is currently not fully explored in composites. One of the main reasons is that pulp fibers are extracted for the use in papermaking and are thus not optimized for use as reinforcements in thermoplastics ...
Electrical resistance in carbon-fiber reinforced polymers has been shown experimentally to be a sensitive measure of internal damage. To quantify the dependence of electrical resistance on mechanical fiber damage at the micromechanical level, a numerical e ...
Unsaturated Polyester (UP) resins are extensively used as a matrix for the production of composites due to their low cost and versatility. Their significant polymerization shrinkage has however a negative impact on the dimensional stability of the molded p ...
This paper examines the mechanisms by which a polymer is dispersed in a co-rotating twin-screw extruder. An experimental investigation of the morphological evolution has been carried out on a 45-mm co-rotating twin-screw extruder. Polyethylene/polystyrene ...
The forced compression behavior of random 3D and 2D pulp fiber networks is investigated. Existing theories are found to describe well the evolution of packing stress with fiber volume fraction for the pulp networks. It was, moreover, found that the packing ...
The mechanical properties of continuous fibre reinforced metals (CFRMs) are known to be very sensitive to the selection and composition of the metallic matrix; for aluminium based CFRMs, commercial alloys are not suitable for this purpose. In the present s ...
An optical fiber Bragg grating (FBG) embedded in an epoxy matrix is indubitably subjected to non-negligible residual stresses arising from the cure, especially for a strong fiber-matrix interface. The spectral response of the FBG sensor is clearly influenc ...
Pseudomonas cepaciae lipase adsorbed onto non-porous structured fiber supports in the form of woven fabrics, was used to catalyze hydrolysis and transesterification reactions in the gas phase. The enzyme adsorbed onto carbon fiber support exhibited much hi ...
Stress changes in hydrogenated phosphorous-doped fibers after Bragg grating inscription have been measured. Fibers with three different drawing tensions have been investigated. The core stress was found to increase independently of the initial stress state ...
