Tough-to-brittle transitions in ceramic-matrix composites with increasing interfacial shear stress
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
We present an analytical micromechanical model designed to simulate the tensile stress-strain behaviour and failure of damaging composites containing a high volume fraction of reinforcing particles. One internal damage micromechanism is considered, namely ...
The extremely low permeability of Ultra-High Performance Fibre Reinforced Concretes (UHPFRC)associated to their outstanding mechanical properties make them especially suitable to locally "harden" reinforced concrete structures in critical zones subjected t ...
The constant improvement of polymer composite materials has allowed their integration in many industrial fields where their mechanical and chemical properties are apparently attractive. Mixed metal-composite insulators are now increasingly used for high vo ...
During the crossing of brittle rock formations at the Lötschberg base tunnel, failure phenomena have been observed both at the tunnel face and at the walls. A detailed analysis has been undertaken to explain these behaviours, based on the recent developmen ...
In this paper, we investigate the effect of different process parameters on oxidation-induced strain (OIS) into a doubly-clamped silicon nanowire FET to control and finally, enhance carrier mobility. Spacer technology together with sacrificial thermal oxid ...
This project aims to analyze, fabricate and characterize a mechanical hydrogen sensor. The potential of hydrogen gas detection using beam resonators is investigated. The beams consist mainly of Si3N4, providing a tensile stress to prevent buckling. Pd expa ...
Desiccation cracking of soils is of great importance in geotechnical and geoenvironmental engineering. In many circumstances it is the cause of damages in earthen and soil supported structures. Desiccation cracking affects clayey soil barriers for waste st ...
This paper presents the results of a comprehensive experimental study of the desiccation of fine-grained soils. Air-drying of initially saturated soil slabs in controlled conditions is investigated, by performing three kinds of tests: free desiccation test ...
The purpose of this paper is to investigate experimentally the UHPFRC time-dependent behavior under sustained tensile loading and to determine the effect of the stress level on the creep response. Uniaxial tensile creep tests were performed at various stre ...
The first reported tensile semi-solid stress/strain data for as-cast magnesium alloy Mg Al3 Zn1 are provided. The results show that the maximum tensile stress at the solidus temperature (460 degrees C) was 13 MPa. Furthermore, this alloy has no ductility a ...
