Prediction of intergranular strains in cubic metals using a multisite elastic-plastic model
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In most structural pavement design methods, strains and stresses in the layers are calculated with multi-layer programs based on the Burmister model using the linear elastic theory. Burmister defined loads as a constant pressure applied on a circular surfa ...
The mechanical behavior of an aluminum alloy during uniaxial cyclic loading is examined using finite element simulations of aggregates with individually resolved crystals. The aggregates consist of face centered cubic (FCC) crystals with initial orientatio ...
The present workshop dealt both theoretically and experimentally with issues of primary damage and irradiation induced defect evolution, helium and other impurities, dislocation-defect interactions, deformation to large plastic strains and fracture. It was ...
In this work, we attempt to simulate residual stresses and springback of a deformed metal pan based on a micro-macro modelling of the elastic and plastic strains. Samples cut out of an aluminium plate, under different angles relative to the rolling directi ...
During the up and down cycles of a fusion reactor, the first wall is exposed concomitantly to a flux of energetic neutrons that generates radiation defects and to a thermal flux that induces thermal stresses. The resulting strains may exceed the elastic li ...
We have determined the mechanical anisotropy of a single microtubule by simultaneously measuring the Young's and the shear moduli in vitro. This was achieved by elastically deforming the microtubule deposited on a substrate tailored by electron-beam lithog ...
Traction tests on soft tissues show that the shape of the stress strain curves depends on the strain rate at which the tests are performed. Many of the constitutive models that have been proposed fail to properly consider the effect of the strain rate when ...
This paper describes a microgripper used for the micro-assembly of an artificial scaffold for tissue engineering. The porous sponge-like scaffold is a three dimensional construct built by tiny unit parts of biodegradable polymer. This application requires ...
In this work, in order to improve mechanical stability of pseudomorphic HEMTs (PMHEMTs), we propose a pseudomorphic InAlAs/InGaAs/InP structure where the channel and the spacer are strain compensated: as in the conventional structure, the InGaAs channel is ...
Analysis of the deflection of a circular membrane under differential pressure (bulge test) is a well-known method of determining the elastic properties of thin films. However, analytical models always suffer from simplifying hypotheses. In this study we pr ...
