Isothermal annealing of cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A comprehensive modelling approach has been developed for the simulation of microstructure formation during solidification and heat treatment in Ni-base superalloys. The microsegregation taking place during solidification is simulated using the pseudo-fron ...
The crystallography of bainite, transformed isothermally at 450 °C in 0.2C-2.0Mn-1.5Si-0.6Cr steel, was investigated by electron backscatter diffraction (EBSD) analysis. The orientation relationship (OR) was found to be closer to Nishiyama-Wassermann (N-W) ...
The influence of the quench rate after solution treatment on the bendability of AA6016 aluminum alloy sheets was investigated. Crack initiation during bending tests is found to be independent of quench rate whereas crack propagation is decreased after rapi ...
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
A dedicated diffusion controlled precipitation model for AlMnFeSi-alloys, based on classical nucleation and growth theory, has been implemented and coupled to a phenomenological softening model accounting for the combined effect of recovery and recrystalli ...
A new, more physically realistic and practically useful model is presented for the simulation of high temperature austenite flow curves. It is an extension of our earlier empirical model based on the Avrami kinetics of dynamic recrystallization. In the new ...
Nickel base superalloys are used for the manufacturing of monocrystalline turbine blades, due to their outstanding mechanical properties at high temperature. The mechanical properties strongly depend on the presence of γ’ precipitates in the γ matrix. Impr ...
Microstructure evolution has been studied in the nickel-based superalloy PER®72 subjected to hot torsion, to annealing below the primary γ' solvus temperature and to annealing at a supersolvus temperature, with a special emphasis on grain size and twin con ...
This article describes the microstructure and Charpy impact properties of an Fe-14Cr-2W-0.3-Ti-0.3Y(2)O(3) oxide dispersion strengthened (ODS)-reduced activation ferritic (RAF) steel, manufactured either from elemental powders or from an Fe-14Cr-2W-0.3Ti p ...
The microstructural evolution of deformed 304L stainless steel during static recrystallization and grain growth was characterized by EBSD within an SEM chamber, which enabled microstructural and crystallographic information to be determined. The experiment ...
