Hexagonal OsB2: Sintering, microstructure and mechanical properties
Publications associées (82)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Microstructure, chemical and phase composition of the hard layer formed on the Ti-6Al-4V alloy after duplex surface treatment were investigated by light microscopy (LM), X-ray diffraction (XRD) and analytical scanning, transmission and scanning transmissio ...
A deep analysis of the reliability of lead-free (SnAgCu) solders in comparison with tin-lead solders have been done for a particular aerospace application, SwissCube’s motherboard (MB). Since 2006, using Pb in consumer electronics has been banned. Aerospac ...
Biomimetic apatite coatings were obtained by soaking chemically treated titanium in SBF with different HCO3- concentration. XRD, FTIR and Raman analyses were used to characterize phase composition and degree of carbonate substitution. The microstructure, e ...
An analysis of the tribo-mechanical properties of the Ni-Co system, at the submicrometric contact scale, is conducted using displacement sensing nanoindentation. In particular, the influence of contact depth and surface finishing methods on the hardness, H ...
A deep analysis of the reliability of lead-free (SnAgCu) solders in comparison with tin-lead solders have been done for a particular aerospace application, SwissCube’s motherboard (MB). Since 2006, using Pb in consumer electronics has been banned. Aerospac ...
Various top-down, bottom-up, and hybrid fabrication routes of discontinuous palladium nano and mesostructures can be used for the fabrication of resistor based H2 sensing devices. 1D, 2D, and 3D structures can be achieved using appropriate material templat ...
Various top-down, bottom-up and hybrid fabrication routes of discontinuous palladium nano and mesostructures can be used for the fabrication of resistor based H2 sensing devices. 1-D, 2D, and 3-D structures can be achieved using appropriate material templa ...
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...