The dynamics of a capsule in a wall-bounded oscillating shear flow
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Open-pore 99.99% pure Al and Al-5 wt.% Mg foam produced by replication, with pores either 400 or 75 gm in average diameter, are tested in compression with repeated relaxation cycles, at room temperature. Similar data are collected on pure aluminium. Estima ...
This work addresses the behaviour of replicated microcellular pure aluminium under multiaxial stress states and in the presence of stress and strain localization sites. Processing of the foam was conducted in-house, using the replication process. The main ...
We present molecular dynamics (MD) simulations of the shear-coupled migration (SCM) behaviour of symmetrical tilt boundaries perturbed by the presence of nano-cracks or nano-precipitates lying on the boundary plane. The simulations have been performed for ...
Interstitial flow is an important regulator of various cell behaviors both in vitro and in vivo, yet the forces that fluid flow imposes on cells embedded in a 3D extracellular matrix (ECM), and the effects of matrix architecture on those forces, are not we ...
A wind-tunnel experiment was performed to test surface boundary condition formulations for large-eddy simulation downwind of a rough-to-smooth surface transition in a turbulent boundary layer for (Re-tau approximate to 1.5 x 10(4)). Single and x-wire anemo ...
The flow and failure behaviour of replicated pure aluminium foams in the presence of holes and notches is explored, varying the pore size and the notch depth or hole radius. Flat dog-bone tensile specimens containing a cylindrical hole, and cylindrical V-n ...
[1] A model is developed to quantify the wind sheltering of a lake by a tree canopy or a bluff. The experiment-based model predicts the wind-sheltering coefficient a priori, without calibration, and is useful for one-dimensional (1-D) lake hydrodynamic and ...
The study considers the prediction of the main flow parameters of adiabatic annular two-phase flows, focusing in particular on the void fraction. Recently developed models to predict the entrained liquid fraction, the wall shear stress and the velocity pro ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
Solders are widely used as interconnect material for the electronic industry. The solder interconnect provides both electrical contact and mechanical connection between the integrated circuit devices and their substrate. Thus solders with good reliability ...
