The dynamics of a capsule in a wall-bounded oscillating shear flow
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The flow and failure behaviour of replicated pure aluminium foams in the presence of holes and notches is explored, varying the pore size and the notch depth or hole radius. Flat dog-bone tensile specimens containing a cylindrical hole, and cylindrical V-n ...
Open-pore 99.99% pure Al and Al-5 wt.% Mg foam produced by replication, with pores either 400 or 75 gm in average diameter, are tested in compression with repeated relaxation cycles, at room temperature. Similar data are collected on pure aluminium. Estima ...
Solders are widely used as interconnect material for the electronic industry. The solder interconnect provides both electrical contact and mechanical connection between the integrated circuit devices and their substrate. Thus solders with good reliability ...
A wind-tunnel experiment was performed to test surface boundary condition formulations for large-eddy simulation downwind of a rough-to-smooth surface transition in a turbulent boundary layer for (Re-tau approximate to 1.5 x 10(4)). Single and x-wire anemo ...
The study considers the prediction of the main flow parameters of adiabatic annular two-phase flows, focusing in particular on the void fraction. Recently developed models to predict the entrained liquid fraction, the wall shear stress and the velocity pro ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
We present molecular dynamics (MD) simulations of the shear-coupled migration (SCM) behaviour of symmetrical tilt boundaries perturbed by the presence of nano-cracks or nano-precipitates lying on the boundary plane. The simulations have been performed for ...
[1] A model is developed to quantify the wind sheltering of a lake by a tree canopy or a bluff. The experiment-based model predicts the wind-sheltering coefficient a priori, without calibration, and is useful for one-dimensional (1-D) lake hydrodynamic and ...
This work addresses the behaviour of replicated microcellular pure aluminium under multiaxial stress states and in the presence of stress and strain localization sites. Processing of the foam was conducted in-house, using the replication process. The main ...
Interstitial flow is an important regulator of various cell behaviors both in vitro and in vivo, yet the forces that fluid flow imposes on cells embedded in a 3D extracellular matrix (ECM), and the effects of matrix architecture on those forces, are not we ...
