Measurement of Mechanical Coherency Temperature and Solid Volume Fraction in Al-Zn Alloys Using In Situ X-ray Diffraction During Casting
Publications associées (171)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
It has been shown recently that minute additions of Cr in Al-Zn alloys refine the solidified grain structure and induce multiply-twinned grains which can only be explained if the icosahedral symmetry is considered (Kurtuldu et al., 2013). It has been sugge ...
Hard-sphere colloids are model systems in which to study the glass transition and universal properties of amorphous solids. Using covariance matrix analysis to determine the vibrational modes, we experimentally measure here the scaling behavior of the dens ...
The high temperature behavior of solute strengthening has previously been treated approximately using various scaling arguments, resulting in logarithmic and power-law scalings for the stress-dependent energy barrier Delta E(tau) versus stress tau. Here, a ...
An in situ method to study the behavior of alloys during rapid heating and cooling combining laser heating with synchrotron micro X-ray diffraction and high-speed imaging is presented. Near-spherical Ti-48Al specimens were melted using a laser-based heatin ...
During solidification of metallic alloys, coalescence corresponds to the formation of solid bridges between grains when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behaviour of solidif ...
Hot tearing is a major defect of solidification processes and welding. It occurs in metallic alloys while they are in the semi-solid state and is caused by a lack of liquid feeding in the mushy zone to compensate solid network openings due to tensile and s ...
A new mesoscopic model able to describe percolation of globular-equiaxed grains, highly relevant for hot tearing formation in castings, has been developed. This model is inspired from the granular model of Sistaninia et al. [1-5] that considers polyhedral ...
A 3D phase-field (PhF) model has been developed to study the formation of micropores constrained to grow within a well-developed solid network. The model accounts for the equilibrium condition at triple (solid-liquid-pore) lines and the partitioning of dis ...
A long lasting controversy on the nature of the reaction between liquid, Al and Al45Cr7 has been ended by planar front solidification experiments of Al-Cr alloy in a Bridgman furnace. Cr depletion in the liquid ahead of the quenched planar interface proves ...
The recrystallization textures of a cold-rolled Al-Mn-Fe-Si model alloy with three different microchemistry states after non-isothermal annealing were studied. The microstructure and texture evolution have been characterized by EBSD. It is clearly demonstr ...