Incorporation of aluminium in calcium-silicate-hydrates
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Atomistic simulation methods, namely molecular dynamics and well-tempered metadynamics, are used in this thesis to investigate apatite formation from different aspects. First, ions which are more abundant in SBFs under physiological conditions were identif ...
Ye'climitc (Ca4Al6O12SO4 or C(4)A(3)(S) over bar) is the main hydraulic mineral present in calcium sulfoaluminate cement (CSA). The hydration of ye'elimite is responsible for the early age cement properties. We identify 5 stages in the hydration of neat st ...
Uptake of the alkalis K and Na by calcium silicate hydrate (C-S-H) and calcium alumina silicate hydrate (C-A-S-H) of molar Ca/Si ratios = 0.6 to 1.6 and molar Al/Si ratio = 0 or 0.05 has been studied at 20 degrees C. Alkalis are thought to be bound in the ...
Calcium sulphoaluminate cements (CSA) with the main phase yeâelimite are a promising class of non-Portland cements which are gaining increasing interest from the cement industry. However, the hydration kinetics of CSA cements varies strongly, even for ce ...
The aim of the work is to study interface formation between Al2O3 particles and Al(Ca) matrix in dependence of Ca content. Aluminium matrix composites (AMC) subjected to investigation were prepared by gas pressure assisted infiltration of alumina beds with ...
Metallic aluminium plays a key role in our modern economy. Primary
metallic aluminium is produced by the transformation of aluminium
oxide using the Hall-Héroult industrial process. This process, which
requires enormous quantities of energy, consists in pe ...
Vast amounts of phosphogypsum (PG) which is a by-product of phosphorous acid production from apatite rock using sulphuric acid, are deposited in large piles at many locations worldwide. PG materials are added at rates of the order of megatonnes (Mt) per an ...
Paul Scherrer Institute, World Resources Forum2019
Calcium silicate hydrate (C-S-H) is the main hydrate phase in Portland cements. Its composition
varies depending on the Ca/Si ratio and on the presence of other ions such as aluminium (called CA-
S-H) or alkalis.
This thesis aimed to study the compositi ...
Aluminium uptake in calcium silicate hydrate (C-S-H) was studied at different Ca/Si ratios from 0.6 to 1.6 at 20 degrees C. Aluminium incorporation in C-S-H depends on the total amount of aluminium present in the sample. At low Al/Si ratio (
Despite the widespread use of amorphous aluminosilicates (ASA) in various industrial catalysts, the nature of the interface between silica and alumina and the atomic structure of the catalytically active sites are still subject to debate. Here, by the use ...