Publication

Highly stretchable dielectric elastomer composites containing high volume fractions of silver nanoparticles

Concepts associés (35)
Diélectrique
thumb|La séparation de charge dans un condensateur à plaques parallèles engendre un champ électrique interne. Le matériau diélectrique (en orange) réduit ce champ et augmente la capacitance. Un milieu est diélectrique (mot composé du préfixe grec (« au travers ») et électrique) s'il ne contient pas de charges électriques susceptibles de se déplacer de façon macroscopique. Le milieu ne peut donc pas conduire le courant électrique, et est souvent un isolant électrique.
Dielectric loss
In electrical engineering, dielectric loss quantifies a dielectric material's inherent dissipation of electromagnetic energy (e.g. heat). It can be parameterized in terms of either the loss angle δ or the corresponding loss tangent tan(δ). Both refer to the phasor in the complex plane whose real and imaginary parts are the resistive (lossy) component of an electromagnetic field and its reactive (lossless) counterpart.
Relative permittivity
The relative permittivity (in older texts, dielectric constant) is the permittivity of a material expressed as a ratio with the electric permittivity of a vacuum. A dielectric is an insulating material, and the dielectric constant of an insulator measures the ability of the insulator to store electric energy in an electrical field. Permittivity is a material's property that affects the Coulomb force between two point charges in the material. Relative permittivity is the factor by which the electric field between the charges is decreased relative to vacuum.
Permittivité
La permittivité, plus précisément permittivité diélectrique, est une propriété physique qui décrit la réponse d'un milieu donné à un champ électrique appliqué. C'est une propriété macroscopique, essentielle de l'électrostatique, ainsi que de l‘électrodynamique des milieux continus. Elle intervient dans de nombreux domaines, notamment dans l’étude de la propagation des ondes électromagnétiques, et en particulier la lumière visible et les ondes utilisées en radiodiffusion. On la retrouve donc en optique, via l'indice de réfraction.
Dissipation factor
In physics, the dissipation factor (DF) is a measure of loss-rate of energy of a mode of oscillation (mechanical, electrical, or electromechanical) in a dissipative system. It is the reciprocal of quality factor, which represents the "quality" or durability of oscillation. Electrical potential energy is dissipated in all dielectric materials, usually in the form of heat. In a capacitor made of a dielectric placed between conductors, the typical lumped element model includes a lossless ideal capacitor in series with a resistor termed the equivalent series resistance (ESR) as shown below.
Dielectric heating
Dielectric heating, also known as electronic heating, radio frequency heating, and high-frequency heating, is the process in which a radio frequency (RF) alternating electric field, or radio wave or microwave electromagnetic radiation heats a dielectric material. At higher frequencies, this heating is caused by molecular dipole rotation within the dielectric. Molecular rotation occurs in materials containing polar molecules having an electrical dipole moment, with the consequence that they will align themselves in an electromagnetic field.
Rigidité diélectrique
La rigidité diélectrique d’un milieu isolant représente la valeur maximum du champ électrique que le milieu peut supporter avant le déclenchement d’un arc électrique (donc d’un court-circuit). On parle alors de claquage de l'isolant. C'est l'une des caractéristiques principales des isolants. On utilise aussi l'expression champ disruptif qui est synonyme mais plus fréquemment utilisée pour qualifier la tenue d'une installation, alors que le terme rigidité diélectrique est plus utilisé pour qualifier un matériau.
Low-κ dielectric
In semiconductor manufacturing, a low-κ is a material with a small relative dielectric constant (κ, kappa) relative to silicon dioxide. Low-κ dielectric material implementation is one of several strategies used to allow continued scaling of microelectronic devices, colloquially referred to as extending Moore's law. In digital circuits, insulating dielectrics separate the conducting parts (wire interconnects and transistors) from one another.
Spectroscopie diélectrique
Dielectric spectroscopy (which falls in a subcategory of impedance spectroscopy) measures the dielectric properties of a medium as a function of frequency. It is based on the interaction of an external field with the electric dipole moment of the sample, often expressed by permittivity. It is also an experimental method of characterizing electrochemical systems. This technique measures the impedance of a system over a range of frequencies, and therefore the frequency response of the system, including the energy storage and dissipation properties, is revealed.
Diélectrique high-k
Un diélectrique high-κ (high-κ dielectric) est un matériau avec une constante diélectrique κ élevée (comparée à celle du dioxyde de silicium) utilisé dans la fabrication de composants semi-conducteur en remplacement de la grille habituellement en dioxyde de silicium. L'utilisation de ce type de matériau constitue l'une des stratégies de développement permettant la miniaturisation des composés en microélectronique, afin de permettre de continuer à suivre la Loi de Moore.

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.