In situ X-ray Diffraction during Casting: Study of Hot Tearing in Al-Zn alloys
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
An oxide dispersion strengthened ODS ferritic steel has been produced by mechanical alloying of Fe–14Cr–2W–0.2Ti (wt.%) prealloyed powder with 0.55 (wt.%) Fe2Y intermetallic particles and consolidated by hot isostatic pressing. The microstructure after the ...
Hard-sphere colloids are model systems in which to study the glass transition and universal properties of amorphous solids. Using covariance matrix analysis to determine the vibrational modes, we experimentally measure here the scaling behavior of the dens ...
Failure and flow of amorphous materials are central to various phenomena including earthquakes and landslides. There is accumulating evidence that the yielding transition between a flowing and an arrested phase is a critical phenomenon, but the associated ...
A 3-dimensional phase-field model is implemented to simulate the grain evolution in the final stage of liquid-phase sintering. The model considers a liquid phase and a polycrystalline solid phase. Results for varying ratios of the solid-solid interface ene ...
New BMGs exhibiting strong glass forming ability combined with high hardness have been developed based on the Pt-Si-B ternary system. The effects of partial substitution of platinum by transition metals of the group iron, cobalt, nickel, and copper, as wel ...
It has been shown recently that minute additions of Cr in Al-Zn alloys refine the solidified grain structure and induce multiply-twinned grains which can only be explained if the icosahedral symmetry is considered (Kurtuldu et al., 2013). It has been sugge ...
The non-isothermal aging behaviour of a newly developed Al–Zn–Mg–Cu alloy containing 17 wt-% Zn was investigated. Hardness and shear punch tests demonstrated that during nonisothermal aging, the mechanical properties of the alloy first increased and then d ...
The aim of this study is to propose a series of mechanical anchorage system for strengthening of steel plates with iron-based shape memory (Fe-SMA) strips. Four different friction-based mechanical clamps to anchor the Fe-SMA strips to the steel substrate w ...
During solidification of metallic alloys, coalescence leads to the formation of solid bridges between grains or grain clusters when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behavior ...
Hot tearing is a major defect of solidification processes and welding. It occurs in metallic alloys while they are in the semi-solid state and is caused by a lack of liquid feeding in the mushy zone to compensate solid network openings due to tensile and s ...
