Embrittlement induced by the synergistic effects of radiation damage and helium in structural steels
Publications associées (427)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Single crystal deformation unveiling the characteristics of crystal glide and the role of defect propagation herein has been a matter of intense research more than 60 years ago. A manifold of different mechanical testing methods and crystal qualities were ...
As the upper temperature for use of reduced activation ferritic/martensitic steels is presently limited by a drop in mechanical strength at about 550 degrees C, Europe, Japan and the US are actively researching steels with high strength at higher operating ...
In order to deeply understand the high temperature deformation behaviors of Cu-0.23%Al2O3 (volume fraction) alloy, the changes of flow stress and microstructure for this alloy after deformation at high temperatures were investigated by using the Gleeble-15 ...
Uniaxial quasi-static tensile testing on individual nanocrystalline Co nanowires (NWs), synthesized by electrochemical deposition process (EDP) in porous templates, was performed inside a scanning electron microscope (SEM) using a microfabricated tensile s ...
This paper presents the results of a comprehensive experimental study of the desiccation of fine-grained soils. Air-drying of initially saturated soil slabs in controlled conditions is investigated, by performing three kinds of tests: free desiccation test ...
The first reported tensile semi-solid stress/strain data for as-cast magnesium alloy Mg Al3 Zn1 are provided. The results show that the maximum tensile stress at the solidus temperature (460 degrees C) was 13 MPa. Furthermore, this alloy has no ductility a ...
We present Molecular Dynamics (MD) simulations of the shear–coupled migration behaviour of a Σ 17(530)/[001] symmetrical tilt boundary, in the absence or in the presence of nanocracks lying on the grain boundary (GB) plane. The simulations have been perfor ...
TiAl is a well known high temperature material with good creep properties. It is investigated as a potential structural material for Generation IV high temperature gas cooled nuclear reactors. The tests are performed with the ABB-2 (Ti-rich TiAl with 2 at. ...
Transmission electron microscopy (TEM) has been used to investigate the effect of laponite clay on microdeformation in thin latex-based polystyrene (PS) films, in which the laponite was concentrated at the original interfaces between the PS particles. At r ...
Size-dependent plastic flow behavior is manifested in nanoindentation, microbending, and pillar-compression experiments and plays a key role in the contact mechanics and friction of rough surfaces. Recent experiments using a hard flat plate to compress sin ...