A simplified method for collapse capacity assessment of moment-resisting frame and shear wall structural systems
Publications associées (40)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Spandrel elements in unreinforced brick masonry buildings with timber floors consist of a masonry spandrel supported by either a timber lintel or a masonry arch. When subjected to seismic loading, the force-deformation relationship of such spandrel element ...
Abstract Performance-based earthquake engineering necessitates the development of reliable nonlinear analysis models that are able to simulate the behavior of structures from the onset of damage through collapse. These models provide engineering demand par ...
Reliable collapse assessment of structural systems under earthquake loading requires analytical models that are able to capture component deterioration in strength and stiffness. For calibration and validation of these models, a large set of experimental d ...
Most civil engineering infrastructures, especially bridges worldwide, are approaching the end of their designed lifespan. They are continuously deteriorating due largely to material aging, excessive loads and changing environments. Therefore, it is crucial ...
When compared to tests on reinforced concrete (RC) walls with a rectangular or barbelled cross-section, only very few tests on RC walls with open cross-section exist. Most of these walls were subjected to unidirectional or bidirectional loading along one o ...
Structural R/C cores are a popular and efficient choice as lateral-load resisting system in medium to tall buildings. The walls of the cores typically present large openings providing access to elevators placed within them. Shear induced by lateral forces ...
The objective of the present work is that of making a contribution to the performance-based seismic design of RC buildings with U-shaped walls. Since U-shaped walls are often placed at the perimeter of a building and are typically stiffer and stronger than ...
A thorough four-step performance-based seismic evaluation for a six-story unreinforced masonry building is conducted. Incremental dynamic analysis is carried out using the applied element method to take advantage of its ability to simulate progressive coll ...
With the introduction of higher seismic design forces in the Swiss loading standard of 2003 most unreinforced masonry (URM) buildings failed to satisfy the seismic design check. For this reason, in new construction projects, a number of URM walls are nowad ...
The present research on cut-and-cover tunnels gives a theoretical contribution to the understanding of the behaviour of these structures up to their ultimate limit state. A simplified method inspired on the convergence-confinement method is investigated an ...