Storing Renewable Energy in the Hydrogen Cycle

Elsa Callini, Shunsuke Kato
Swiss Chemical Soc, 2015
Article

Résumé

An energy economy based on renewable energy requires massive energy storage, approx. half of the annual energy consumption. Therefore, the production of a synthetic energy carrier, e.g. hydrogen, is necessary. The hydrogen cycle, i.e. production of hydrogen from water by renewable energy, storage and use of hydrogen in fuel cells, combustion engines or turbines is a closed cycle. Electrolysis splits water into hydrogen and oxygen and represents a mature technology in the power range up to 100 kW. However, the major technological challenge is to build electrolyzers in the power range of several MW producing high purity hydrogen with a high efficiency. After the production of hydrogen, large scale and safe hydrogen storage is required. Hydrogen is stored either as a molecule or as an atom in the case of hydrides. The maximum volumetric hydrogen density of a molecular hydrogen storage is limited to the density of liquid hydrogen. In a complex hydride the hydrogen density is limited to 20 mass% and 150 kg/m(3) which corresponds to twice the density of liquid hydrogen. Current research focuses on the investigation of new storage materials based on combinations of complex hydrides with amides and the understanding of the hydrogen sorption mechanism in order to better control the reaction for the hydrogen storage applications.

Official source

https://infoscience.epfl.ch/record/216106?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Storage of Renewable Energy by Reduction of CO2 with Hydrogen

Elsa Callini, Marco Roman Holzer, Jianmei Huang, Shunsuke Kato, Philippe Mauron

The main difference between the past energy economy during the industrialization period which was mainly based on mining of fossil fuels, e.g. coal, oil and methane and the future energy economy based on renewable energy is the requirement for storage of the energy fluxes. Renewable energy, except biomass, appears in time- and location-dependent energy fluxes as heat or electricity upon conversion. Storage and transport of energy requires a high energy density and has to be realized in a closed materials cycle. The hydrogen cycle, i.e. production of hydrogen from water by renewable energy, storage and use of hydrogen in fuel cells, combustion engines or turbines, is a closed cycle. However, the hydrogen density in a storage system is limited to 20 mass% and 150 kg/m(3) which limits the energy density to about half of the energy density in fossil fuels. Introducing CO, into the cycle and storing hydrogen by the reduction of CO, to hydrocarbons allows renewable energy to be converted into synthetic fuels with the same energy density as fossil fuels. The resulting cycle is a closed cycle (CO2 neutral) if CO, is extracted from the atmosphere. Today's technology allows CO, to be reduced either by the Sabatier reaction to methane, by the reversed water gas shift reaction to CO and further reduction of CO by the Fischer Tropsch synthesis (FTS) to hydrocarbons or over methanol to gasoline. The overall process can only be realized on a very large scale, because the large number of by-products of FTS requires the use of a refinery. Therefore, a well-controlled reaction to a specific product is required for the efficient conversion of renewable energy (electricity) into an easy to store liquid hydrocarbon (fuel). In order to realize a closed hydrocarbon cycle the two major challenges are to extract CO, from the atmosphere close to the thermodynamic limit and to reduce CO2 with hydrogen in a controlled reaction to a specific hydrocarbon. Nanomaterials with nanopores and the unique surface structures of metallic clusters offer new opportunities for the production of synthetic fuels.

Schweizerische Chemische Gesellschaft2015

Chargement

High-pressure NMR spectroscopic and calorimetric studies on formic acid dehydrogenation and carbon dioxide hydrogenation

Cornel Fink

Our current energy production is convenient and simple, but it is not sustainable. The negative impacts on our environment are omnipresent in the form of smog, extinction of species, and global warming. A major challenge of our generation is the transition to new, responsible methods of energy production. The maxim is renewable energy. Hydrogen could serve as an intermediary energy carrier. However, problems arise with the storage of hydrogen due to safety concerns and low volumetric energy density. The reduction of carbon dioxide (CO2) to formic acid (FA) is an elegant process to âcompressâ hydrogen by transforming it into a chemical which is easier and safer to handle. In this dissertation, catalytic FA dehydrogenation, CO2 reduction and calorimetric studies of the involved thermodynamics are described. The first chapter provides a global overview, beginning with general considerations about energy economy, then crossing over to hydrogen storage and infrastructure for a future hydrogen economy, before discussing FA as a hydrogen storage medium and summarizing the developments of FA dehydrogenation and CO2 hydrogenation. Chapter two describes different compounds we have studied as potential catalysts for FA dehydrogenation and CO2 hydrogenation. The focus is on complexes of Ir, Rh, and Ru regarding metals, and on Cp* and an ethylene-spaced diamine as ligands. Other motifs were also explored including Ru-phosphine complexes which afforded unexpected results. The most promising candidates are examined more closely. The third chapter summarizes our findings of formic acid dehydrogenation with homogeneous catalysts, presented in three parts. Each subchapter highlights a different structural feature or metal center. The first one focuses on Ir and Rh metal centers, equipped with Cp* and diamines. In the second section, we explore the catalytic performance of a RAPTA-type precatalyst, and the last one addresses our achievements with a rhodium catalyst containing Cp* and di(1-pyrazolyl)methane ligands. The catalysts were evaluated towards core properties such as stability (TON), activity (TOF) and recycling. Chapter four elucidates the interactions of FA with different solvents and additives, which influence the kinetics and thermodynamics of FA dehydrogenation and CO2 hydrogenation. NMR and FT-IR spectroscopy, conductometry, calorimetric measurements and computational methods were used to analyze the systems thoroughly. In chapter five, high-pressure calorimetric measurements are employed to quantify the actual energy balance during the endothermic process of FA dehydrogenation. For this purpose, we modified an off-the-shelf high-pressure reactor to suit our needs and constructed a thermo-controlled environment. Chapter six describes our research into catalytic CO2 hydrogenation to FA with two ruthenium-based phosphine pre-catalysts. One has three 1,4,7-triaza-9-phosphatricyclotridecane (CAP) ligands coordinated, which is a just recently described phosphine compound. The other complex is prepared via a straightforward synthesis route with an inexpensive, simple ligand. Both are stable in aqueous FA over weeks, making them potential catalysts for large-scale application.

EPFL2018

Chargement

The world needs to move from a fossil fuel to a renewable energy based society. With the increasing electricity production from wind and PV, short and long term energy storage are becoming one of challenge of the 21st century. While batteries are the preferred method for short term storage, another technology is required for seasonal storage. Hydrogen is a valuable energy carrier owning its high energy density (122 kJ/g). However, compact and safe storage of H2 is challenging. The current solution is to compress hydrogen up to 700 bar for mobile application (fuel cell cars), and metal hydrides for stationary application. Material-based H2 storage avoids using high-pressure cylinder. Complex hydrides are especially attractive for solid-state H2 storage due to their high gravimetric and volumetric hydrogen density. Sodium borohydride (NaBH4) contains 10.6 mass% of H2, but high temperatures are needed to release H2 (505 Â°C) and the reaction is not reversible under moderate conditions. To apply complex hydrides in real applications, they must be modified to improve the kinetics and thermodynamics of H2 desorption. Several possibilities exist such as confinement into scaffolds, catalyst addition, or combination of several hydrides to modify the dehydrogenation pathway. The stability of complex hydrides is determined by the localization of the charge on the central atom of the complex. Therefore, in this thesis the interaction of highly polar or ionic compounds with complex hydrides were investigated. We combine NaBH4 with a special class of organic salts: ionic liquids (IL). Considering their chemical and thermal stability, IL are attractive additive. Using organic additives instead of expensive metal catalysts is another advantage. Two different techniques were employed to combine the IL and NaBH4. The first one consists of mechanochemically milling them to create an interaction between BH4- and IL. The second one is to directly synthesized IL borohydrides ([IL][BH4]) by metathesis reaction. Different ILs, such as vinylbenzyltrimethylammonium chloride ([VBTMA][Cl]), 1-butyl-3-methylimidazolium chloride ([bmim][Cl]), and 1-ethyl-1-methylpyrrolidinium bromide ([EMPY][Br]) were tested. [bmim][BH4] was able to release H2 below 100 Â°C. The hydrogen content ranges between 2.4 mass% and 2.9 mass%. The second challenge of this century is the CO2 problematic. Atmospheric CO2 concentration linearly increases, leading to greenhouse effect. Carbon capture and sequestration (CCS) and utilization (CCU) are primordial research topic to stabilize the CO2 emission. Hydrides are primary reducing agents, thus reduction of CO2 can be accomplished with them. Direct CO2 reduction at ambient conditions is challenging for classical borohydrides. With our [IL][BH4], gaseous CO2 can be captured and reduced under ambient conditions (1 bar, RT). Three CO2 bounds with boron to give triformatoborohydride ([HB(OCHO)3]â. Dilute CO2 (6 vol%) can be used as well. The reaction was followed in real time with a magnetic suspended balance (MSB). Further, CO2 reduction happened when air is used as a carbon dioxide source. Formic acid can be obtained by adding HCl. Thus, ionic liquid borohydrides have great potential as a CO2 absorber and reducer to alternative fuels. In short, we applied ionic liquid to destabilized borohydrides. The resulting materials exhibited potential for solid-state hydrogen storage, as well as CO2 capture and transformation.

EPFL2021

Chargement

EPFL2021

Storage of Renewable Energy by Reduction of CO2 with Hydrogen

Elsa Callini, Marco Roman Holzer, Jianmei Huang, Shunsuke Kato, Philippe Mauron

Schweizerische Chemische Gesellschaft2015

High-pressure NMR spectroscopic and calorimetric studies on formic acid dehydrogenation and carbon dioxide hydrogenation

Cornel Fink

EPFL2018