Design of the HTS Fusion Conductors for TF and CS Coils
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A new concept of polyimide electrical insulation for superconducting cables of accelerator magnets was developed in the last years. Its enhanced He II permeability allows a significant improvement of the heat extraction from the coil. This cable insulation ...
Cabled conductors based on Nb3Sn technology with operating current in the range of 20 kA and above are mainly restricted to fusion magnets and high field facilities. The experience of last decade has dramatically shown that, opposite to the NbTi conductors ...
Two ITER IF dual channel Cable-in-Conduit Conductors (CICCs) have been tested in the SULTAN test facility. The samples were heated either by foil heaters mounted on the outside of the conductor jacket or by induced AC losses. The steady-state temperature r ...
The coupling current loss in rectangular superconducting cables is strictly dependent on their aspect ratio, which has an impact on the area linked by the field variation and consequently on the currents induced between strands. The relation between the ac ...
The aim of this paper is to present an experimental validation of a frequency- domain approach to the solution of the lightning electromagnetic field-to- buried cable coupling equations. The coupling to the inner conductor is evaluated using the concept of ...
One of the biggest goals for the international thermonuclear experimental reactor (ITER) is the steady state operation. For this reason all its coils will be superconducting and Nb3Sn material is used for both the toroidal field (TF) and the central soleno ...
The brittleness of the MgB2 wires prevents performing a cable architecture with very small bending radius, similar to NbTi Rutherford cables. Consequently, it is important to reduce the thickness of the superconducting materials in order to increase its be ...
In a conventional design and manufacturing process, turbine blades are modeled based on reverse engineering or on parametric modeling with Computer Fluids Dynamics (CFD) optimization. Then, only raises the question of the manufacturing of the blades. As th ...
This report presents some approaches to modelize urban energy systems. More precisely, as a first step, a clear definition of what is an urban energy system model is exposed before listing the main tech- niques of modelization. With the goal to run a case ...
An R&D program at CRPP investigates the design of large size Nb3Sn conductors, with the aim to improve the effectiveness and hence the cost of large size, force flow conductors. A design based on a solder filled flat cable, by react wind method, is selecte ...
